9
1. Insert the large end of the hose into the blower connection in the top of the motor housing (figure 1).
2. Ensure the power switch is turned off and plug in the power supply (figure 2).
3. Switch on the power (figure 3).
4. The unit will now blow through the vacuum hose and can be used to clear obstructions within the hose
(figure 4).
WARNING!
If after a few seconds the hose continues to be blocked, turn off the unit and clear the
hose manually.
1. Ensure that the power cord is disconnected from the outlet (figure 1).
2. Disconnect the hose from the tank (figure 2).
3. Push the ‘R’ lock pin on the handle socket down and take off the handle (figure 3).
4. Undo the clasps and remove the top section from the tank (figure 4).
5. Clear all dirt or debris from the tank and hose (figure 5).
6. Clean the foam filter by washing it with a mild soapy solution (figure 6).
7. Check the hose, attachments and the power cord to ensure that they have not been damaged (figure 7).
IMPORTANT! CLEAN THE CARTRIDGE FILTER REGULARLY. IF THE MACHINE IS USED WITHOUT
THE CARTRIDGE FILTER, THE MOTOR WILL BURN OUT AND THE WARRANTY WILL BE VOIDED.
ALWAYS ENSURE TO KEEP SPARE FILTERS HANDY.
Maintenance
Blower Operation
