3
Installation Instructions
Step 1: Installation of Upper Straps
Carefully remove your hard Top or fold down/remove
your soft top. Once the top is removed/folded down,
locate the top center of your Wind Stopper and attach
the top straps centering the product on your Sport Bar.
Do not tighten these straps at this point. Fig 1
Installation of Wind Stopper: (all versions)
FIG 1
Step 2: Installation of Lower Straps
Once the Wind Stopper is centered, locate the side
straps of your Wind Stopper and attach them to the ver-
tical sides of the Sport Bar. If you are not attaching the
optional MasterTop Tonneau cover to your Wind Stop-
per, tighten all straps starting on the top and working
left then right to ensure the Wind Stopper stays cen-
tered on the Sport Bar. If you are attaching the optional
Tonneau Cover, keep these straps loose and proceed
to Step 3. Fig 2
FIG 2
Step 3 - Optional: With MasterTop Tonneau
Before tightening your Wind Stopper, attach the
Tonneau Cover to the Wind Stopper using the sewn in
zipper. Secure the Zipper all the way across the Wind
Stopper. Tighten all Wind Stopper straps starting on the
top and working left then right to ensure the Wind Stop-
per stays centered on the Sport Bar. Then begin the
installation of your Tonneau Cover. Fig 3
For tips on daily use, please see next page.
FIG 3
This product is custom designed to be used in conjunction with an optional MasterTop Tonneau Cover.
Each Wind Stopper has a built-in zipper on the front edge where this Tonneau Cover can be attached. If you
choose not to use the Tonneau Cover, the zipper portion will not be required and will remain attached under
the flap of your Wind Stopper.
The MasterTop Wind Stopper is designed to protect the inside of your vehicle against light showers and
against wind buffeting. It is not a waterproof cover. Water may leak inside your vehicle through around the
sport bar during heavy down pours.
MT_YJ_WIND_S_INST_LTR_6.qxp_Layout 1 3/13/17 3:14 PM Page 3
03132017151630