MasterSounds UNION AUDIO Radius 2, Руководство по эксплуатации

Страница: 6 / 12

CH1/CH2 ROTARY FADER – Each channel has a large rotary fader for
precision control of its level when mixing. The rotary ranges from
fully off when anti- clockwise to unity gain (0dB) when clockwise. For
best performance operate these controls near to their fully clockwise
position for normal music level.
VU METERS – The Radius 2 features two high quality analogue VU (Volume
Unit) meters, which accurately measure the left and right audio signals.
The meters show the post EQ sound level. An added feature of the VU
Meters is that when driven over +6VU the meter will illuminate RED to
warn against clipping. In SPLIT MODE the LEFT VU Meter indicates the
cue signal level, and the RIGHT VU Meter indicates the MIX level, (see
SPLIT below).
MASTER EQ/ISOLATOR – The MASTER EQ /ISOLATOR functions as a normal
isolator using 12dB/octave filters with crossover frequencies at 350Hz
and 3.5kHz making for a very musical Isolator. We have positioned the
layout of the pots so it easily works as a Master EQ (The hi-pass filters
on each channel are used instead of a conventional 3 or 4 band EQ).
MASTER – The MASTER rotary pot adjusts the signal level sent to the Main
Output XLRs (House Mix) ranging from off to +10dBu of gain. Set the
control to approximately 1 o’clock for unity.
BOOTH – The BOOTH rotary pot adjusts the signal level sent to the Booth
Output TRS Jacks (Monitor Mix) ranging from off to +10dBu of gain. Set
the control to approximately 1 o’clock for unity.
SPLIT – The SPLIT CUE button illuminates RED when activated and links
to the cue Buttons and VU Meters. When the SPLIT CUE is active and a
channel CUE is pressed, the Mix Buss Level will be shown on the Right
Meter, and the channel Pre-Fade signal (CUE) shown on the Left Meter,
enabling you to balance the two levels for smoother mixing. The Split
button also sends the cued source to the Left headphone and the mix
source to the Right headphone which is very useful if mixing in a quiet
environment. SPLIT CUE is automatically disabled when the Channel CUEs
are Off, and the Meters and Headphones revert to monitoring the Stereo
Master Mix Signal.
PHONES – Use the headphone pot to control the sound level sent to
your headphones. Please take care when monitoring with headphones as
excessive sound volumes can cause premature deafness. The 1⁄4” jack
headphone input is located on the front of the mixer as shown on the
headphone graphic.
Radius 2
Operation Manual Front panel controls
6