Connection & Setup.
(ii)
When powering Clarity A on and off it’s of prime importance that the following
mantra is observed and strictly adhered to. Improper switching will damage your
audio devices and will void your Clarity A warranty.
Make sure all levels/volume are turned
down to ZERO/OFF on your audio source pri-
or to powering on any equipment.
Turn down the volume on your audio source
to ZERO/OFF.
Power on your audio source & any other
associated equipment.
Power off Clarity A via the power switch
on the rear of Sub:8.
Power on Clarity A via the power switch on
the rear of Sub:8.
Then, turn off your audio source and any
associated equipment.
2
1
3
POWER ON
POWER OFF
Connection & Setup.
(i)
AUDIO SOURCE CABLES.
To connect your Clarity A to your audio source* be sure to check you have the
correct cables. The inputs on the back of Sub:8 require 2x MALE XLR inputs, so
when choosing your cables, please ensure that they have MALE XLR inputs for
Clarity A.
SETUP GUIDE.
(Rear View)
If your audio source* does not feature a balanced output, Clarity A can still
accept unbalanced audio, however, a MALE XLR connector is still required to
connect to the rear of Sub:8.
Cube:6
Cube:6
Sub:8
AUDIO SOURCE
OUTPUT
LEFT
INPUT
LEFT
OUTPUT
RIGHT
INPUT
R
L
RIGHT
OUTPUT
Audio source output to MALE XLR cable
(not included, see above.)
Connect the included RIGHT SpeakON™ from
the RIGHT OUTPUT on SUB:8 to the RIGHT
Cube:6.
Line up the slots to the inputs on the back
of Cube:6 + Sub:8, insert and twist clock-
wise to click and lock in place.
To unlock, pull back the silver clip on the
SpeakON™ cable, twist & release.
Connect the included LEFT SpeakON™ cable
from the LEFT OUTPUT to the LEFT Cube:6.
Line up the slots to the inputs on the back
of Cube:6 + Sub:8, insert and twist clock-
wise to click and lock in place.
To unlock, pull back the silver clip on the
SpeakON™ cable, twist & release.
*
‘audio source’ = e.g. DJ Mixer, Hi-Fi
Pre-Amplifier, DAC (Digital Analogue Con-
verter) or Digital Streaming Device.
