2
i n f o @ m a s t e r p l a n t . c o m
2
DIRECT Recording
1) Connect amp speaker out to ATTENUATOR input
2) Set amp to match
3) Set Attenuator to position 6
4) Connect Line Out to computer audio card
5) Choose Full Range Line Out if using impulses.
Dry/Wet with attenuation
1) Connect left amp speaker out to ATTENUATOR input
2) Set amp to match
3) Connect ATTENUATOR speaker out to left speaker cab
4) Connect Full range Line Out to input of delay effect
5) Connect delay output of effect to right amp input
6) Connect right amp speaker out to right speaker cab
