MasterForce 270-3282, Руководство оператора

Страница: 17 / 24

Page 16
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
The handle is not in
position.
The bolts are not
engaged correctly.
Adjust the height of the handle and make sure
that the knobs and bolts are aligned correctly.
The machine does not
start.
The battery is not
charged.
Charge the battery by following the procedures
in the battery and charger manual.
The switch is
defective.
Have the switch replaced by an authorized
service center or call 844-678-7423 for more
direction.
Battery is too cold. Remove battery from snow thrower. Place
battery on charger and allow to charge for 10
minutes or until the changing light turns green.
Remove from charger and install in snow
thrower for use.
Battery may
require service or
replacement.
Call toll free helpline to determine battery issue
and to see if a replacement battery is needed.
The engine is on, but
the impeller does not
turn.
The belt is damaged. Replace the belt.
A thin layer of snow
stays behind.
The scraper is
damaged.
Replace the scraper.