MasterForce 267-3333, Руководство оператора

Страница: 15 / 24

15
DEFECTIVE BATTERY
If the charger detects a problem, the red LED will begin flashing and the
green LED will be off.
1. If registering as defective, remove and reinsert the battery pack in the
charger. If the LED status reads “defective” a second time, try charging a
different battery pack.
2. If a different battery pack charges normally, dispose of the defective
battery pack (see Maintenance section).
3. If a different battery pack also indicates “defective,” the charger may
be defective.
BATTERY CHARGING
If the battery pack is within normal temperature range, the green LED will
begin flashing and the red LED will be off. The battery pack will reach a
full charge in 75 minutes (for included battery pack 252-8032). The power
indicator LED lights will cycle from right to left during charging. This is part of
the normal charging operation.
BATTERY FULL
After fully charged, the green LED Light on the charger will be on and the red
LED light will be off.
NOTE: The battery pack will fully charge, but will not overcharge, if left on
the charger.
NOTE: The power indicator LED lights will not be displayed when the power
indicator button pressed while the battery pack is still on the charger.
NOTE: Charger may warm with several continuous charge cycles. This is part
of the normal operation of the charge. Charge in a well ventilated area.
TO ATTACH BATTERY PACK (Fig. 5)
1. Lock the trigger switch in the
“OFF” position.
2. Align the raised portion on the
battery pack with the grooves on
the bottom of the trimmer, and
then attach the battery pack to
the trimmer as shown.
3. Make sure that the latch on the
battery pack snaps into place
and the battery pack is secured to
the trimmer before beginning operation.
ATTACH
Fig. 5