You will need the manual for the safety warnings and precautions, operating and maintenance
procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice
number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for
future reference.
Be sure to read and understand all safety instructions in this manual,
Be sure to read and understand all safety instructions in this manual, including all safety
alert symbols such as “danger”, “warning”, and “caution”, before using this power tool.
Failure to follow all instructions listed below may result in electrical shock, fire and/or
serious personal injury.
WARNING:
NOTES
SAVE THIS MANUAL
1. Mount only according to these instructions.
Improper mounting can create hazards.
2. Keep work area clean and well lit.
3. Keep bystanders out of the area during use.
4. This product is not a toy. Do not allow children to play with or near this item.
5. Use for intended purposes only.
6. Inspect before use; do not use if parts are loose or damaged.
7. Maintain product labels and nameplates.
These carry important safety information. If unreadable or missing, contact 1-800-255-7011
for a replacement.
8. Before drilling vise mounting holes, check for hidden electrical wires or cords in drilling path.
9. Do not use this product if under the influence of alcohol or drugs.
Read safety warning labels on prescriptions to determine if your judgement or reflexes are
impaired while taking drugs. If there is any doubt, do not use this product.
10. Use eye and hand protection. Wear ANSI-approved safety impact goggles and heavy-duty
work gloves during use.
11. DRESS SAFELY. Do not wear loose clothing or jewelry as they can become caught in
moving parts. Wear a protective hair covering to prevent long hair from becoming caught in
the moving parts.
12. When working with the anvil, do not strike with a hardened tool.
it could chip the anvil and/or the tool.
SAFETY INSTRUCTIONS
Page 1
Page 4
NOTE
The following safety warnings and precautions.
