MasterForce 241-0790, Руководство оператора

Страница: 5 / 11

8 9
8. Orbit control lever
9. Cutting angle guide
10. Variable speed dial
11. Blade storage
12. Hex key
13. Blade
14. Tool-less blade change catch
15. Parallel guide
16. Parallel guide lock screw
17. Laser /work light on/off switch
18. Laser aperture
19. LED worklight
20. Power on indicator
21. Vacuum/blower selector
ASSEMBLY AND ADJUSTMENT
FITTING AND REMOVING THE BLADE
WARNING! Always ensure that the saw is switched off and the plug is
removed from the power source before making any adjustments or changing
a blade.
Flip up the blade guard to afford better
access to the blade clamp.
Turn the jig saw upside down and using
your thumb and forefinger, push down
the tool-less blade change catch (14).
Slide the ‘U’ or ‘T’ type blade into the
locating hole with the teeth pointing
forward, ensuring that the blade rear
edge is located and supported by the
blade roller guide (7). (Fig.1)
Release the tool-less blade change catch (14) to lock the blade in position, pull
on the blade to ensure that it is fully locked in position.
Fig. 1
KNOW YOUR JIG SAW
Before attempting to use this jig saw, become familiar with all of its operating
features and safety requirements. For optimum performance and safety, read
the following operating instructions carefully before using the saw.
WARNING! Do not allow familiarity with the jig saw to cause a lack of
alertness. A fraction of a second of carelessness is enough to cause severe
injury.
Parts list
1. Trigger switch
2. Lock-on button
3. Soft grip handle
4. Dust extraction adaptor
5. Shoe plate
6. Blade guard
7. Blade roller guide
10
17
18
8
6
16
13
15
7
9
5
11
4
12
19
14 21
1 2
3
20