MasterForce 241-0418, Руководство оператора

Страница: 5 / 16

Page 4
SAFETy INSTRUCTIONS
WARNING:
Read all safety
warnings and instructions!
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury . Save all warnings and instructions for
future reference .
The term power tool in the warnings refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool .
WARNING:
Risk of fire and
electric shock. Do not use in rainy or wet
conditions. Use in dry locationd only.
WORK AREA SAFETy
1. Keep the work area clean and well lit.
Cluttered or dark areas invite accidents .
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power
tools create sparks which may ignite the
dust or fumes .
3. Keep children and bystanders away
while operating a power tool.
Distractions
can cause you to lose control .
ELECTRICAL SAFETy
1. Power tool plugs must match the
outlet.
Never modify the plug in any way .
Do not use any adapter plugs with earthed
(grounded) power tools . Unmodified plugs
and matching outlets will reduce the risk of
electric shock .
2. Avoid body contact with earthed
or grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There
is an increased risk of electric shock if your
body is earthed or grounded .
3. Do not expose power tools to rain or
wet conditions.
Water entering a power tool
will increase the risk of electric shock .
4. Do not abuse the cord.
Never use the
cord for carrying, pulling or unplugging the
power tool . Keep the cord away from heat,
oil, sharp edges or moving parts . Damaged
or entangled cords increase the risk of
electric shock .
5. When operating a power tool outdoors,
use an extension cord suitable for outdoor
use.
Use of a cord suitable for outdoor use
reduces the risk of electric shock .
6. If operating a power tool in a damp
location is unavoidable, use a ground-fault
circuit interrupter (GFCI) protected supply.
Use of a GFCI reduces the risk of electric
shock .
PERSONAL SAFETy
1. Stay alert, watch what you are doing
and use common sense when operating a
power tool.
Do not use the tool while tired
or under the influence of drugs, alcohol, or
medication . A moment of inattention while
operating power tools may result in serious
personal injury .
2. Use personal protective equipment.
Always wear eye protection . Protective
equipment, such as a dust mask, non-skid
safety shoes, hard hat, or hearing protection,
used for appropriate conditions, will reduce
the risk of personal injuries .
3. Prevent unintentional starting. Ensure
that the switch is in the off-position before
connecting to the power source and/or
battery pack, picking up or carrying the tool .
Carrying power tools with your finger on the
switch or energizing power tools that have
the switch on invites accidents .
4. Remove any adjusting key or wrench
before turning the power tool on.
A wrench
or a key left attached to a rotating part of the
power tool may result in personal injury .
5. Do not overreach. Keep proper footing
and balance at all times . This enables better
control of the power tool in unexpected
situations .