Page 10
OPERATION
TO ATTACH bATTERy
PACk (FIG. 1)
1 . Lock the trigger switch on the impact
wrench by placing the direction of
rotation (forward/center-lock/reverse)
selector in center position .
2 . Align the raised rib on the battery pack
with the grooves of the wrench, and then
attach the battery pack to the wrench .
FIG. 1
NOTICE:
Make sure that the latch on the
battery pack snaps into place and that the
battery pack is secured to the tool before
beginning operation .
TO DETACH bATTERy
PACk (FIG. 1)
1 . Lock the trigger switch on the impact
wrench by placing the direction of
rotation (forward/ center lock/reverse)
selector in the center position .
2 . Depress the battery release buttons
located on the both sides of the battery
pack to release the battery pack .
3 . Pull the battery pack out and remove it
from the tool .
WARNING:
battery tools are
always in operating condition. Therefore,
the direction-of-rotation selector should
battery tools are always in operating
condition. Therefore, the direction-of-
rotation selector should always be locked
when not in use or carrying at your side.
CAUTION:
When placing the
battery pack on the tool, be sure that the
raised rib on battery pack aligns with the
groove inside the wrench and that the
latches snap into place properly. Improper
attachment of the battery pack can cause
damage to internal components.
