TROUBLESHOOTING
Troubleshooting
SYMPTOM
CAUSE
REMEDY
Defective line
1. Check that unit is plugged into a
cord or fuse.
live line.
2. Check line cord for continuity and
replace if defective.
3. Check fuse and replace if defective.
Defective
1. Place the FWD-OFF-REV switch
Motor or
in the OFF position.
Controller.
2. Test motor and controller.
a). Check the drive motor cable
connection to the controller.
b). Replace motor, with similar
unit. Reconnect the drive
motor to the controller. Retest.
c). Replace controller with similar
unit. Reconnect the drive
motor to the controller. Retest.
Motor does not
rotate, when
switched to FWD or
REV. POWER indica-
tor does not glow.
Motor does not
rotate, when
switched to FWD or
REV. Power indica-
tor glows. Speed
control setting is
greater than 0.
SPECIFICATIONS
Operating Temperature:
0˚ to 40˚C
Storage Temperature:
-45˚ to 65˚C
Chemical Resistance:
Exposed material is
paint, plastic, aluminum,
and vinyl
Line Voltage Limits:
7552-70
100–130 V, 50-60 Hz
7552-75
190–260 V, 50-60 Hz
Speed Range:
6 to 600 rpm
Typical Power:
Motor:
0.075 kW (0.1 hp)
Controller:
6 watts, max. dissipation
Fuses:
115V Units:
3 A
230V Units:
1.5 A
Torque:
13 kg-cm (180 oz-in)
Speed Regulation:
±5% Line Regulation
±10% Load Regulation
±10% Warm-Up Drift
Controller Enclosure Rating:
IP56
Motor Enclosure Rating:
IP56
Humidity: (non-condensing)
0% to 90%
Display:
RED Indicator
Dimensions: (L x W x H)
Motor:
280mm x 102mm x 127mm
(11 in x 4 in x 5 in)
Controller:
229mm x 203mm x 152mm
(9 in x 8 in x 6 in)
Weight:
Motor:
4.1 kg (9 pounds)
Controller:
2.3 kg (5 pounds)
6
7
