Masterflex Ismatec Reglo 78018-10 Скачать руководство пользователя

Страница: 5 / 57

1-1

Masterflex REGLO Digital Pump Drive with Advanced Connectivity

Section 1: Introduction

Masterflex

SECTION 1: INTRODUCTION

SAFE OPERATION

The REGLO Digital Pump Drive with Advanced Connectivity is designed for pumping and dispensing

applications in laboratory and process environments. Confirm that the pump drive is operated only in the

manner specified in this operating manual and that safe work practices and Good Laboratory Practice (GLP)

are followed. Misuse of the pump drive may compromise built-in safety protections and result in injury and/

or damage to equipment. Do not operate the pump drive with water on the surface of the touchscreen.

The following Safety Symbols are used in this documentation:

CAUTION: Risk of Danger. Consult Operating Manual for nature of hazard

and corrective actions.
CAUTION: Risk of crushing. Keep fingers away from the rotor while the

pump is in operation. Stop pump before loading or unloading tubing.

CAUTION: Hot Surface. Do not touch.

CAUTION: Risk of electric shock. Consult Operating Manual for nature of

hazard and corrective actions.

ABOUT THE REGLO

The REGLO Digital Pump Drive with Advanced Connectivity offers precise flow control and highly accurate

fluid dispensing ideal for laboratory, process, and field use. All REGLO precision drives include a highly

accurate, maintenance-free motor and an easy to navigate touchscreen that makes setup and operation easier

than ever. The REGLO range features Ethernet and Wi-Fi connections for web-based remote control and

monitoring using the MasterflexLive™ website (see

www.masterflex.com

), and remote analog control and

monitoring through the pump drive’s DB-25 female connection port.

Package Contents

•  Pump Drive
•  24 VDC Desktop Power Supply Set
•  Quick Start Guide
•  Flash Drive Containing the Operating Manual

NOTE:

Please check the package and its contents for any visible signs of damage. If any damage is found

please contact Technical Assistance immediately (see "

Technical Assistance

" on page 3-48).

Содержание Ismatec Reglo 78018-10


























































Результаты поиска

Содержание Ismatec Reglo 78018-10

Отзывы:

Похожие инструкции для Ismatec Reglo 78018-10

Бренды по названию

Популярные бренды

Masterflex Ismatec Reglo 78018-10, Руководство по эксплуатации

Результаты поиска

Содержание Ismatec Reglo 78018-10

Отзывы:

Похожие инструкции для Ismatec Reglo 78018-10

Бренды по названию

Популярные бренды