Pin No. DB-25
®
Digital
Dispensing Pumps
Quick Start Guide
Digital Pump
with Microflex
Pump Head
77123-00
Digital Pump
with Miniflex
Pump Head
07525-20
Digital Dispensing Pumps
.
O
N
.
T
A
C
N
O
I
T
P
I
R
C
S
E
D
07525-40
07525-20
Digital Pump 0.1 to 300 rpm with Single Channel Miniflex Pump Head
Digital Pump 0.1 to 300 rpm with Dual Channel Miniflex Pump Head
77123-00
(US & Canada only) Toll Free 1-800-MASTERFLEX • 1-800-637-3739
(Outside US & Canada) 1-847-549-7600 • 1-847-381-7050
E-mail: [email protected]
www.masterflex.com • www.coleparmer.com
A-1299-7327
Edition 01
Digital Pump 0.1 to 300 rpm with Microflex Pump Head
Pin No. DB-25
Description
1 Speed Control Voltage Input (0-10 V)
2 Speed Control Current Input (0-20 mA)
3 Speed Control Input Ground Return
4 Speed Signal Current Output (0-20 mA)
5 Speed Signal Output Ground Reference
6 Motor Running N.O. Relay 1A @24V
7 Motor Running Common
8 Reserved - Not Used
14 Speed Signal Voltage Output (0-10 V)
15 Remote Start/Stop Input
16 Remote CW/CCW Input
17 Remote Start/Stop, CW/CCW, Prime Ground Ref.
18 Tach Ground Reference
19 Tach Output (Open Collector)
20 Remote Prime Input
23 General Alarm Relay
24 Local/Remote Indicator Relay
10-12 Reserved - Not Used
21 General Alarm Common
25 Aux 24V+
13 Aux 24V-
Pin No.
DB-25
SAFETY
PRECAUTIONS
Explanation of
Symbols
WARNING:
Product Use
Limitation
DANGER: Remove power from the pump before any cleaning operation is started.
WARNINGS: Remove power from the pump before attempting any maintenance.
A contactor or other device that routinely disconnects and reapplies the AC line
to the drive to start and stop the motor can cause drive hardware damage. The drive is
designed to use control input signals that will start and stop the motor.
WARNINGS: Tubing breakage may result in fluid being sprayed from pump.
Use appropriate measures to protect operator and equipment.
Unplug Pump System before removing or installing tubing. Fingers or loose clothing
could get caught in drive mechanism.
CAUTIONS: Unplug Pump System before connecting the external remote control
cable to prevent damage to the drive.
CAUTIONS: To avoid electrical shock, the power cord protective grounding conductor
must be connected to ground. Not for operation in wet locations as defined by EN61010-1.
If the product is not used in a manner specified in the instructions, the protection provided
by the equipment may be impaired.
CAUTION: Risk of Danger. Consult Operator’s manual for nature of hazard and
corrective actions.
CAUTION: Risk of crushing. Keep fingers away from rotor while pump is in operation.
Stop pump before loading or unloading tubing.
CAUTION: Risk of electric shock. Consult Operator’s manual for nature of hazard and
corrective actions.
This product is not designed for, nor intended for use in patient connected
applications; including, but not limited to, medical and dental use, and accordingly
has not been submitted for FDA approval.
This product is not designed for, nor intended for use in hazardous duty areas as
defined by ATEX or the NEC (National Electrical Code); including but not limited to
use with flammable liquids.
Replacement Cord/Plug Sets Ordering Information
Catalog
number
50001-60
50001-62
50001-64
50001-68
50001-69
50001-70
50001-72
50001-74
50001-76
50001-78
—
Italy
U.S. 230V
—
Israel
Europe
England
Switzerland
n
o
it
p
i
r
c
s
e
D
n
o
it
p
i
r
c
s
e
D
Description
number
Catalog
number
Australia
Denmark
India
U.S. STD. 115V
—
—
Catalog
0.1 -
3
00 rpm
0
7525-20, -40
4.8 lb (2.2 kg)
77123-00
4.5 lb (2.0 kg)
9 Remote Voltage or Current Enable
10
BATCH COUNT
OFF TIME
11
EN
T
EN
T
RECORD COPY
EN
T
9
22 Local/Remote Indicator Common
07523-92
Footswitch w/DB-25 male connector
07523-94
DB-25 male connector for remote control
(connector only)
07523-95
Cable assembly, DB-25 male connector
and 25-ft (7.9m) cable w/stripped wire ends
07523-97
Dispensing wand DB-25 male connector
Product Accessories
1
2
3
8
COPY DISP. MODE
DUPLICAR DISP.
DISTR. REPETEE
WH.FÖRD.MOD.
MOD DIST COPIA
TUBING CAL
CAL DE TUBERÍA
ÉTALON. TUYAU
ROHRLEITUNGSKAL
TARATURA TUBI
07525-90
Power Supply, 24VDC output, 90 to 260 VAC input.
EN
T
9
EN
T
EN
T
COPY
EN
T
SETUP
MONTAJE
INSTALLATION
SETUP
IMPOSTAZIONE
セットアップ
EN
T
PUMP SPEED
EN
T
CONTINUOUS MODE
MODO CONTINUO
MODE CONTINU
DAUERMODUS
MOD CONTINUA
SETUP
MONTAJE
INSTALLATION
SETUP
IMPOSTAZIONE
セットアップ
PUMP DIRECTION
DIRECCIÓN BOMBA
DIRECTION POMPE
PUMPRICHTUNG
DIREZIONE POMPA
FLOW RATE
CAUDAL
DÉBIT
DURCHFLUSSRATE
INDICE DI FLUSSO
KEYPAD LOCKOUT
BLOQUEO DE TECLADO
VERROUILLAGE CLAV.
TASTENFELDSPERRE
BLOCCO DEI TASTI
REMOTE CONTROL
CONTROL REMOTO
TÉLÉCOMMANDE
FERNBEDIENUNG
CONTROLLO REMOTO
FLOW UNITS
UNIDADES DE FLUJO
UNITÉS DE DÉBIT
DURCHFLUSSEINHEIT
UNITÀ DI FLUSSO
BACK
START/STOP
INICIO/DETENCIÓN
DÉMARRER/ARRÊTER
START/STOPP
AVVIO/ARRESTO
/
/
PRIME
CEBAR
AMORÇER
ANSAUGEN
ADESCARE
Graphic Interface Keypad Legend
6
4
5
ENTER
ENTRE
ENTRER
EINGABE
INSERIRE
PUMP RUNNING
EN
T
SETUP
MONTAJE
INSTALLATION
SETUP
IMPOSTAZIONE
セットアップ
FLOW UNITS
UNIDADES DE FLUJO
UNITÉS DE DÉBIT
DURCHFLUSSEINHEIT
UNITÀ DI FLUSSO
TUBING SIZE
TAMAÑO DEL TUBO
TAILLE DU TUYAU
ROHRLEITUNGSGR.
DIMENSIONE TUBI
EN
T
EN
T
EN
T
7
FLOW RATE
CAUDAL
DÉBIT
DURCHFLUSSRATE
INDICE DI FLUSSO
®
Digital
Dispensing Pumps
Quick Start Guide
Digital Pump
with Microflex
Pump Head
77123-00
Digital Pump
with Miniflex
Pump Head
07525-20
Digital Dispensing Pumps
.
O
N
.
T
A
C
N
O
I
T
P
I
R
C
S
E
D
07525-40
07525-20
Digital Pump 0.1 to 300 rpm with Single Channel Miniflex Pump Head
Digital Pump 0.1 to 300 rpm with Dual Channel Miniflex Pump Head
77123-00
(US & Canada only) Toll Free 1-800-MASTERFLEX • 1-800-637-3739
(Outside US & Canada) 1-847-549-7600 • 1-847-381-7050
E-mail: [email protected]
www.masterflex.com • www.coleparmer.com
A-1299-7327
Edition 01
Digital Pump 0.1 to 300 rpm with Microflex Pump Head
Pin No. DB-25
Description
1 Speed Control Voltage Input (0-10 V)
2 Speed Control Current Input (0-20 mA)
3 Speed Control Input Ground Return
4 Speed Signal Current Output (0-20 mA)
5 Speed Signal Output Ground Reference
6 Motor Running N.O. Relay 1A @24V
7 Motor Running Common
8 Reserved - Not Used
14 Speed Signal Voltage Output (0-10 V)
15 Remote Start/Stop Input
16 Remote CW/CCW Input
17 Remote Start/Stop, CW/CCW, Prime Ground Ref.
18 Tach Ground Reference
19 Tach Output (Open Collector)
20 Remote Prime Input
23 General Alarm Relay
24 Local/Remote Indicator Relay
10-12 Reserved - Not Used
21 General Alarm Common
25 Aux 24V+
13 Aux 24V-
Pin No.
DB-25
SAFETY
PRECAUTIONS
Explanation of
Symbols
WARNING:
Product Use
Limitation
DANGER: Remove power from the pump before any cleaning operation is started.
WARNINGS: Remove power from the pump before attempting any maintenance.
A contactor or other device that routinely disconnects and reapplies the AC line
to the drive to start and stop the motor can cause drive hardware damage. The drive is
designed to use control input signals that will start and stop the motor.
WARNINGS: Tubing breakage may result in fluid being sprayed from pump.
Use appropriate measures to protect operator and equipment.
Unplug Pump System before removing or installing tubing. Fingers or loose clothing
could get caught in drive mechanism.
CAUTIONS: Unplug Pump System before connecting the external remote control
cable to prevent damage to the drive.
CAUTIONS: To avoid electrical shock, the power cord protective grounding conductor
must be connected to ground. Not for operation in wet locations as defined by EN61010-1.
If the product is not used in a manner specified in the instructions, the protection provided
by the equipment may be impaired.
CAUTION: Risk of Danger. Consult Operator’s manual for nature of hazard and
corrective actions.
CAUTION: Risk of crushing. Keep fingers away from rotor while pump is in operation.
Stop pump before loading or unloading tubing.
CAUTION: Risk of electric shock. Consult Operator’s manual for nature of hazard and
corrective actions.
This product is not designed for, nor intended for use in patient connected
applications; including, but not limited to, medical and dental use, and accordingly
has not been submitted for FDA approval.
This product is not designed for, nor intended for use in hazardous duty areas as
defined by ATEX or the NEC (National Electrical Code); including but not limited to
use with flammable liquids.
Replacement Cord/Plug Sets Ordering Information
Catalog
number
50001-60
50001-62
50001-64
50001-68
50001-69
50001-70
50001-72
50001-74
50001-76
50001-78
—
Italy
U.S. 230V
—
Israel
Europe
England
Switzerland
n
o
it
p
i
r
c
s
e
D
n
o
it
p
i
r
c
s
e
D
Description
number
Catalog
number
Australia
Denmark
India
U.S. STD. 115V
—
—
Catalog
0.1 -
3
00 rpm
0
7525-20, -40
4.8 lb (2.2 kg)
77123-00
4.5 lb (2.0 kg)
9 Remote Voltage or Current Enable
10
BATCH COUNT
OFF TIME
11
EN
T
EN
T
RECORD COPY
EN
T
9
22 Local/Remote Indicator Common
07523-92
Footswitch w/DB-25 male connector
07523-94
DB-25 male connector for remote control
(connector only)
07523-95
Cable assembly, DB-25 male connector
and 25-ft (7.9m) cable w/stripped wire ends
07523-97
Dispensing wand DB-25 male connector
Product Accessories
1
2
3
8
COPY DISP. MODE
DUPLICAR DISP.
DISTR. REPETEE
WH.FÖRD.MOD.
MOD DIST COPIA
TUBING CAL
CAL DE TUBERÍA
ÉTALON. TUYAU
ROHRLEITUNGSKAL
TARATURA TUBI
07525-90
Power Supply, 24VDC output, 90 to 260 VAC input.
EN
T
9
EN
T
EN
T
COPY
EN
T
SETUP
MONTAJE
INSTALLATION
SETUP
IMPOSTAZIONE
セットアップ
EN
T
PUMP SPEED
EN
T
CONTINUOUS MODE
MODO CONTINUO
MODE CONTINU
DAUERMODUS
MOD CONTINUA
SETUP
MONTAJE
INSTALLATION
SETUP
IMPOSTAZIONE
セットアップ
PUMP DIRECTION
DIRECCIÓN BOMBA
DIRECTION POMPE
PUMPRICHTUNG
DIREZIONE POMPA
FLOW RATE
CAUDAL
DÉBIT
DURCHFLUSSRATE
INDICE DI FLUSSO
KEYPAD LOCKOUT
BLOQUEO DE TECLADO
VERROUILLAGE CLAV.
TASTENFELDSPERRE
BLOCCO DEI TASTI
REMOTE CONTROL
CONTROL REMOTO
TÉLÉCOMMANDE
FERNBEDIENUNG
CONTROLLO REMOTO
FLOW UNITS
UNIDADES DE FLUJO
UNITÉS DE DÉBIT
DURCHFLUSSEINHEIT
UNITÀ DI FLUSSO
BACK
START/STOP
INICIO/DETENCIÓN
DÉMARRER/ARRÊTER
START/STOPP
AVVIO/ARRESTO
/
/
PRIME
CEBAR
AMORÇER
ANSAUGEN
ADESCARE
Graphic Interface Keypad Legend
6
4
5
ENTER
ENTRE
ENTRER
EINGABE
INSERIRE
PUMP RUNNING
EN
T
SETUP
MONTAJE
INSTALLATION
SETUP
IMPOSTAZIONE
セットアップ
FLOW UNITS
UNIDADES DE FLUJO
UNITÉS DE DÉBIT
DURCHFLUSSEINHEIT
UNITÀ DI FLUSSO
TUBING SIZE
TAMAÑO DEL TUBO
TAILLE DU TUYAU
ROHRLEITUNGSGR.
DIMENSIONE TUBI
EN
T
EN
T
EN
T
7
FLOW RATE
CAUDAL
DÉBIT
DURCHFLUSSRATE
INDICE DI FLUSSO
®
Digital
Dispensing Pumps
Quick Start Guide
Digital Pump
with Microflex
Pump Head
77123-00
Digital Pump
with Miniflex
Pump Head
07525-20
Digital Dispensing Pumps
.
O
N
.
T
A
C
N
O
I
T
P
I
R
C
S
E
D
07525-40
07525-20
Digital Pump 0.1 to 300 rpm with Single Channel Miniflex Pump Head
Digital Pump 0.1 to 300 rpm with Dual Channel Miniflex Pump Head
77123-00
(US & Canada only) Toll Free 1-800-MASTERFLEX • 1-800-637-3739
(Outside US & Canada) 1-847-549-7600 • 1-847-381-7050
E-mail: [email protected]
www.masterflex.com • www.coleparmer.com
A-1299-7327
Edition 01
Digital Pump 0.1 to 300 rpm with Microflex Pump Head
Pin No. DB-25
Description
1 Speed Control Voltage Input (0-10 V)
2 Speed Control Current Input (0-20 mA)
3 Speed Control Input Ground Return
4 Speed Signal Current Output (0-20 mA)
5 Speed Signal Output Ground Reference
6 Motor Running N.O. Relay 1A @24V
7 Motor Running Common
8 Reserved - Not Used
14 Speed Signal Voltage Output (0-10 V)
15 Remote Start/Stop Input
16 Remote CW/CCW Input
17 Remote Start/Stop, CW/CCW, Prime Ground Ref.
18 Tach Ground Reference
19 Tach Output (Open Collector)
20 Remote Prime Input
23 General Alarm Relay
24 Local/Remote Indicator Relay
10-12 Reserved - Not Used
21 General Alarm Common
25 Aux 24V+
13 Aux 24V-
Pin No.
DB-25
SAFETY
PRECAUTIONS
Explanation of
Symbols
WARNING:
Product Use
Limitation
DANGER: Remove power from the pump before any cleaning operation is started.
WARNINGS: Remove power from the pump before attempting any maintenance.
A contactor or other device that routinely disconnects and reapplies the AC line
to the drive to start and stop the motor can cause drive hardware damage. The drive is
designed to use control input signals that will start and stop the motor.
WARNINGS: Tubing breakage may result in fluid being sprayed from pump.
Use appropriate measures to protect operator and equipment.
Unplug Pump System before removing or installing tubing. Fingers or loose clothing
could get caught in drive mechanism.
CAUTIONS: Unplug Pump System before connecting the external remote control
cable to prevent damage to the drive.
CAUTIONS: To avoid electrical shock, the power cord protective grounding conductor
must be connected to ground. Not for operation in wet locations as defined by EN61010-1.
If the product is not used in a manner specified in the instructions, the protection provided
by the equipment may be impaired.
CAUTION: Risk of Danger. Consult Operator’s manual for nature of hazard and
corrective actions.
CAUTION: Risk of crushing. Keep fingers away from rotor while pump is in operation.
Stop pump before loading or unloading tubing.
CAUTION: Risk of electric shock. Consult Operator’s manual for nature of hazard and
corrective actions.
This product is not designed for, nor intended for use in patient connected
applications; including, but not limited to, medical and dental use, and accordingly
has not been submitted for FDA approval.
This product is not designed for, nor intended for use in hazardous duty areas as
defined by ATEX or the NEC (National Electrical Code); including but not limited to
use with flammable liquids.
Replacement Cord/Plug Sets Ordering Information
Catalog
number
50001-60
50001-62
50001-64
50001-68
50001-69
50001-70
50001-72
50001-74
50001-76
50001-78
—
Italy
U.S. 230V
—
Israel
Europe
England
Switzerland
n
o
it
p
i
r
c
s
e
D
n
o
it
p
i
r
c
s
e
D
Description
number
Catalog
number
Australia
Denmark
India
U.S. STD. 115V
—
—
Catalog
0.1 -
3
00 rpm
0
7525-20, -40
4.8 lb (2.2 kg)
77123-00
4.5 lb (2.0 kg)
9 Remote Voltage or Current Enable
10
BATCH COUNT
OFF TIME
11
EN
T
EN
T
RECORD COPY
EN
T
9
22 Local/Remote Indicator Common
07523-92
Footswitch w/DB-25 male connector
07523-94
DB-25 male connector for remote control
(connector only)
07523-95
Cable assembly, DB-25 male connector
and 25-ft (7.9m) cable w/stripped wire ends
07523-97
Dispensing wand DB-25 male connector
Product Accessories
1
2
3
8
COPY DISP. MODE
DUPLICAR DISP.
DISTR. REPETEE
WH.FÖRD.MOD.
MOD DIST COPIA
TUBING CAL
CAL DE TUBERÍA
ÉTALON. TUYAU
ROHRLEITUNGSKAL
TARATURA TUBI
07525-90
Power Supply, 24VDC output, 90 to 260 VAC input.
EN
T
9
EN
T
EN
T
COPY
EN
T
SETUP
MONTAJE
INSTALLATION
SETUP
IMPOSTAZIONE
セットアップ
EN
T
PUMP SPEED
EN
T
CONTINUOUS MODE
MODO CONTINUO
MODE CONTINU
DAUERMODUS
MOD CONTINUA
SETUP
MONTAJE
INSTALLATION
SETUP
IMPOSTAZIONE
セットアップ
PUMP DIRECTION
DIRECCIÓN BOMBA
DIRECTION POMPE
PUMPRICHTUNG
DIREZIONE POMPA
FLOW RATE
CAUDAL
DÉBIT
DURCHFLUSSRATE
INDICE DI FLUSSO
KEYPAD LOCKOUT
BLOQUEO DE TECLADO
VERROUILLAGE CLAV.
TASTENFELDSPERRE
BLOCCO DEI TASTI
REMOTE CONTROL
CONTROL REMOTO
TÉLÉCOMMANDE
FERNBEDIENUNG
CONTROLLO REMOTO
FLOW UNITS
UNIDADES DE FLUJO
UNITÉS DE DÉBIT
DURCHFLUSSEINHEIT
UNITÀ DI FLUSSO
BACK
START/STOP
INICIO/DETENCIÓN
DÉMARRER/ARRÊTER
START/STOPP
AVVIO/ARRESTO
/
/
PRIME
CEBAR
AMORÇER
ANSAUGEN
ADESCARE
Graphic Interface Keypad Legend
6
4
5
ENTER
ENTRE
ENTRER
EINGABE
INSERIRE
PUMP RUNNING
EN
T
SETUP
MONTAJE
INSTALLATION
SETUP
IMPOSTAZIONE
セットアップ
FLOW UNITS
UNIDADES DE FLUJO
UNITÉS DE DÉBIT
DURCHFLUSSEINHEIT
UNITÀ DI FLUSSO
TUBING SIZE
TAMAÑO DEL TUBO
TAILLE DU TUYAU
ROHRLEITUNGSGR.
DIMENSIONE TUBI
EN
T
EN
T
EN
T
7
FLOW RATE
CAUDAL
DÉBIT
DURCHFLUSSRATE
INDICE DI FLUSSO
®
Digital
Dispensing Pumps
Quick Start Guide
Digital Pump
with Microflex
Pump Head
77123-00
Digital Pump
with Miniflex
Pump Head
07525-20
Digital Dispensing Pumps
.
O
N
.
T
A
C
N
O
I
T
P
I
R
C
S
E
D
07525-40
07525-20
Digital Pump 0.1 to 300 rpm with Single Channel Miniflex Pump Head
Digital Pump 0.1 to 300 rpm with Dual Channel Miniflex Pump Head
77123-00
(US & Canada only) Toll Free 1-800-MASTERFLEX • 1-800-637-3739
(Outside US & Canada) 1-847-549-7600 • 1-847-381-7050
E-mail: [email protected]
www.masterflex.com • www.coleparmer.com
A-1299-7327
Edition 01
Digital Pump 0.1 to 300 rpm with Microflex Pump Head
Pin No. DB-25
Description
1 Speed Control Voltage Input (0-10 V)
2 Speed Control Current Input (0-20 mA)
3 Speed Control Input Ground Return
4 Speed Signal Current Output (0-20 mA)
5 Speed Signal Output Ground Reference
6 Motor Running N.O. Relay 1A @24V
7 Motor Running Common
8 Reserved - Not Used
14 Speed Signal Voltage Output (0-10 V)
15 Remote Start/Stop Input
16 Remote CW/CCW Input
17 Remote Start/Stop, CW/CCW, Prime Ground Ref.
18 Tach Ground Reference
19 Tach Output (Open Collector)
20 Remote Prime Input
23 General Alarm Relay
24 Local/Remote Indicator Relay
10-12 Reserved - Not Used
21 General Alarm Common
25 Aux 24V+
13 Aux 24V-
Pin No.
DB-25
SAFETY
PRECAUTIONS
Explanation of
Symbols
WARNING:
Product Use
Limitation
DANGER: Remove power from the pump before any cleaning operation is started.
WARNINGS: Remove power from the pump before attempting any maintenance.
A contactor or other device that routinely disconnects and reapplies the AC line
to the drive to start and stop the motor can cause drive hardware damage. The drive is
designed to use control input signals that will start and stop the motor.
WARNINGS: Tubing breakage may result in fluid being sprayed from pump.
Use appropriate measures to protect operator and equipment.
Unplug Pump System before removing or installing tubing. Fingers or loose clothing
could get caught in drive mechanism.
CAUTIONS: Unplug Pump System before connecting the external remote control
cable to prevent damage to the drive.
CAUTIONS: To avoid electrical shock, the power cord protective grounding conductor
must be connected to ground. Not for operation in wet locations as defined by EN61010-1.
If the product is not used in a manner specified in the instructions, the protection provided
by the equipment may be impaired.
CAUTION: Risk of Danger. Consult Operator’s manual for nature of hazard and
corrective actions.
CAUTION: Risk of crushing. Keep fingers away from rotor while pump is in operation.
Stop pump before loading or unloading tubing.
CAUTION: Risk of electric shock. Consult Operator’s manual for nature of hazard and
corrective actions.
This product is not designed for, nor intended for use in patient connected
applications; including, but not limited to, medical and dental use, and accordingly
has not been submitted for FDA approval.
This product is not designed for, nor intended for use in hazardous duty areas as
defined by ATEX or the NEC (National Electrical Code); including but not limited to
use with flammable liquids.
Replacement Cord/Plug Sets Ordering Information
Catalog
number
50001-60
50001-62
50001-64
50001-68
50001-69
50001-70
50001-72
50001-74
50001-76
50001-78
—
Italy
U.S. 230V
—
Israel
Europe
England
Switzerland
n
o
it
p
i
r
c
s
e
D
n
o
it
p
i
r
c
s
e
D
Description
number
Catalog
number
Australia
Denmark
India
U.S. STD. 115V
—
—
Catalog
0.1 -
3
00 rpm
0
7525-20, -40
4.8 lb (2.2 kg)
77123-00
4.5 lb (2.0 kg)
9 Remote Voltage or Current Enable
10
BATCH COUNT
OFF TIME
11
EN
T
EN
T
RECORD COPY
EN
T
9
22 Local/Remote Indicator Common
07523-92
Footswitch w/DB-25 male connector
07523-94
DB-25 male connector for remote control
(connector only)
07523-95
Cable assembly, DB-25 male connector
and 25-ft (7.9m) cable w/stripped wire ends
07523-97
Dispensing wand DB-25 male connector
Product Accessories
1
2
3
8
COPY DISP. MODE
DUPLICAR DISP.
DISTR. REPETEE
WH.FÖRD.MOD.
MOD DIST COPIA
TUBING CAL
CAL DE TUBERÍA
ÉTALON. TUYAU
ROHRLEITUNGSKAL
TARATURA TUBI
07525-90
Power Supply, 24VDC output, 90 to 260 VAC input.
EN
T
9
EN
T
EN
T
COPY
EN
T
SETUP
MONTAJE
INSTALLATION
SETUP
IMPOSTAZIONE
セットアップ
EN
T
PUMP SPEED
EN
T
CONTINUOUS MODE
MODO CONTINUO
MODE CONTINU
DAUERMODUS
MOD CONTINUA
SETUP
MONTAJE
INSTALLATION
SETUP
IMPOSTAZIONE
セットアップ
PUMP DIRECTION
DIRECCIÓN BOMBA
DIRECTION POMPE
PUMPRICHTUNG
DIREZIONE POMPA
FLOW RATE
CAUDAL
DÉBIT
DURCHFLUSSRATE
INDICE DI FLUSSO
KEYPAD LOCKOUT
BLOQUEO DE TECLADO
VERROUILLAGE CLAV.
TASTENFELDSPERRE
BLOCCO DEI TASTI
REMOTE CONTROL
CONTROL REMOTO
TÉLÉCOMMANDE
FERNBEDIENUNG
CONTROLLO REMOTO
FLOW UNITS
UNIDADES DE FLUJO
UNITÉS DE DÉBIT
DURCHFLUSSEINHEIT
UNITÀ DI FLUSSO
BACK
START/STOP
INICIO/DETENCIÓN
DÉMARRER/ARRÊTER
START/STOPP
AVVIO/ARRESTO
/
/
PRIME
CEBAR
AMORÇER
ANSAUGEN
ADESCARE
Graphic Interface Keypad Legend
6
4
5
ENTER
ENTRE
ENTRER
EINGABE
INSERIRE
PUMP RUNNING
EN
T
SETUP
MONTAJE
INSTALLATION
SETUP
IMPOSTAZIONE
セットアップ
FLOW UNITS
UNIDADES DE FLUJO
UNITÉS DE DÉBIT
DURCHFLUSSEINHEIT
UNITÀ DI FLUSSO
TUBING SIZE
TAMAÑO DEL TUBO
TAILLE DU TUYAU
ROHRLEITUNGSGR.
DIMENSIONE TUBI
EN
T
EN
T
EN
T
7
FLOW RATE
CAUDAL
DÉBIT
DURCHFLUSSRATE
INDICE DI FLUSSO
OFF TIME
TIEMPO DE INACTIVIDAD
HEURE D’ARRÊT
AUS-ZEIT
TEMPO DI SPEGNIMENTO
停机时间
OFFタイム
9
10
11
®
Digital
Dispensing Pumps
Quick Start Guide
Digital Pump
with Microflex
Pump Head
77123-00
Digital Pump
with Miniflex
Pump Head
07525-20
Digital Dispensing Pumps
.
O
N
.
T
A
C
N
O
I
T
P
I
R
C
S
E
D
07525-40
07525-20
Digital Pump 0.1 to 300 rpm with Single Channel Miniflex Pump Head
Digital Pump 0.1 to 300 rpm with Dual Channel Miniflex Pump Head
77123-00
(US & Canada only) Toll Free 1-800-MASTERFLEX • 1-800-637-3739
(Outside US & Canada) 1-847-549-7600 • 1-847-381-7050
E-mail: [email protected]
www.masterflex.com • www.coleparmer.com
A-1299-7327
Edition 01
Digital Pump 0.1 to 300 rpm with Microflex Pump Head
Pin No. DB-25
Description
1 Speed Control Voltage Input (0-10 V)
2 Speed Control Current Input (0-20 mA)
3 Speed Control Input Ground Return
4 Speed Signal Current Output (0-20 mA)
5 Speed Signal Output Ground Reference
6 Motor Running N.O. Relay 1A @24V
7 Motor Running Common
8 Reserved - Not Used
14 Speed Signal Voltage Output (0-10 V)
15 Remote Start/Stop Input
16 Remote CW/CCW Input
17 Remote Start/Stop, CW/CCW, Prime Ground Ref.
18 Tach Ground Reference
19 Tach Output (Open Collector)
20 Remote Prime Input
23 General Alarm Relay
24 Local/Remote Indicator Relay
10-12 Reserved - Not Used
21 General Alarm Common
25 Aux 24V+
13 Aux 24V-
Pin No.
DB-25
SAFETY
PRECAUTIONS
Explanation of
Symbols
WARNING:
Product Use
Limitation
DANGER: Remove power from the pump before any cleaning operation is started.
WARNINGS: Remove power from the pump before attempting any maintenance.
A contactor or other device that routinely disconnects and reapplies the AC line
to the drive to start and stop the motor can cause drive hardware damage. The drive is
designed to use control input signals that will start and stop the motor.
WARNINGS: Tubing breakage may result in fluid being sprayed from pump.
Use appropriate measures to protect operator and equipment.
Unplug Pump System before removing or installing tubing. Fingers or loose clothing
could get caught in drive mechanism.
CAUTIONS: Unplug Pump System before connecting the external remote control
cable to prevent damage to the drive.
CAUTIONS: To avoid electrical shock, the power cord protective grounding conductor
must be connected to ground. Not for operation in wet locations as defined by EN61010-1.
If the product is not used in a manner specified in the instructions, the protection provided
by the equipment may be impaired.
CAUTION: Risk of Danger. Consult Operator’s manual for nature of hazard and
corrective actions.
CAUTION: Risk of crushing. Keep fingers away from rotor while pump is in operation.
Stop pump before loading or unloading tubing.
CAUTION: Risk of electric shock. Consult Operator’s manual for nature of hazard and
corrective actions.
This product is not designed for, nor intended for use in patient connected
applications; including, but not limited to, medical and dental use, and accordingly
has not been submitted for FDA approval.
This product is not designed for, nor intended for use in hazardous duty areas as
defined by ATEX or the NEC (National Electrical Code); including but not limited to
use with flammable liquids.
Replacement Cord/Plug Sets Ordering Information
Catalog
number
50001-60
50001-62
50001-64
50001-68
50001-69
50001-70
50001-72
50001-74
50001-76
50001-78
—
Italy
U.S. 230V
—
Israel
Europe
England
Switzerland
n
o
it
p
i
r
c
s
e
D
n
o
it
p
i
r
c
s
e
D
Description
number
Catalog
number
Australia
Denmark
India
U.S. STD. 115V
—
—
Catalog
0.1 -
3
00 rpm
0
7525-20, -40
4.8 lb (2.2 kg)
77123-00
4.5 lb (2.0 kg)
9 Remote Voltage or Current Enable
10
BATCH COUNT
OFF TIME
11
EN
T
EN
T
RECORD COPY
EN
T
9
22 Local/Remote Indicator Common
07523-92
Footswitch w/DB-25 male connector
07523-94
DB-25 male connector for remote control
(connector only)
07523-95
Cable assembly, DB-25 male connector
and 25-ft (7.9m) cable w/stripped wire ends
07523-97
Dispensing wand DB-25 male connector
Product Accessories
1
2
3
8
COPY DISP. MODE
DUPLICAR DISP.
DISTR. REPETEE
WH.FÖRD.MOD.
MOD DIST COPIA
TUBING CAL
CAL DE TUBERÍA
ÉTALON. TUYAU
ROHRLEITUNGSKAL
TARATURA TUBI
07525-90
Power Supply, 24VDC output, 90 to 260 VAC input.
EN
T
9
EN
T
EN
T
COPY
EN
T
SETUP
MONTAJE
INSTALLATION
SETUP
IMPOSTAZIONE
セットアップ
EN
T
PUMP SPEED
EN
T
CONTINUOUS MODE
MODO CONTINUO
MODE CONTINU
DAUERMODUS
MOD CONTINUA
SETUP
MONTAJE
INSTALLATION
SETUP
IMPOSTAZIONE
セットアップ
PUMP DIRECTION
DIRECCIÓN BOMBA
DIRECTION POMPE
PUMPRICHTUNG
DIREZIONE POMPA
FLOW RATE
CAUDAL
DÉBIT
DURCHFLUSSRATE
INDICE DI FLUSSO
KEYPAD LOCKOUT
BLOQUEO DE TECLADO
VERROUILLAGE CLAV.
TASTENFELDSPERRE
BLOCCO DEI TASTI
REMOTE CONTROL
CONTROL REMOTO
TÉLÉCOMMANDE
FERNBEDIENUNG
CONTROLLO REMOTO
FLOW UNITS
UNIDADES DE FLUJO
UNITÉS DE DÉBIT
DURCHFLUSSEINHEIT
UNITÀ DI FLUSSO
BACK
START/STOP
INICIO/DETENCIÓN
DÉMARRER/ARRÊTER
START/STOPP
AVVIO/ARRESTO
/
/
PRIME
CEBAR
AMORÇER
ANSAUGEN
ADESCARE
Graphic Interface Keypad Legend
6
4
5
ENTER
ENTRE
ENTRER
EINGABE
INSERIRE
PUMP RUNNING
EN
T
SETUP
MONTAJE
INSTALLATION
SETUP
IMPOSTAZIONE
セットアップ
FLOW UNITS
UNIDADES DE FLUJO
UNITÉS DE DÉBIT
DURCHFLUSSEINHEIT
UNITÀ DI FLUSSO
TUBING SIZE
TAMAÑO DEL TUBO
TAILLE DU TUYAU
ROHRLEITUNGSGR.
DIMENSIONE TUBI
EN
T
EN
T
EN
T
7
FLOW RATE
CAUDAL
DÉBIT
DURCHFLUSSRATE
INDICE DI FLUSSO
®
Digital
Dispensing Pumps
Quick Start Guide
Digital Pump
with Microflex
Pump Head
77123-00
Digital Pump
with Miniflex
Pump Head
07525-20
Digital Dispensing Pumps
.
O
N
.
T
A
C
N
O
I
T
P
I
R
C
S
E
D
07525-40
07525-20
Digital Pump 0.1 to 300 rpm with Single Channel Miniflex Pump Head
Digital Pump 0.1 to 300 rpm with Dual Channel Miniflex Pump Head
77123-00
(US & Canada only) Toll Free 1-800-MASTERFLEX • 1-800-637-3739
(Outside US & Canada) 1-847-549-7600 • 1-847-381-7050
E-mail: [email protected]
www.masterflex.com • www.coleparmer.com
A-1299-7327
Edition 01
Digital Pump 0.1 to 300 rpm with Microflex Pump Head
Pin No. DB-25
Description
1 Speed Control Voltage Input (0-10 V)
2 Speed Control Current Input (0-20 mA)
3 Speed Control Input Ground Return
4 Speed Signal Current Output (0-20 mA)
5 Speed Signal Output Ground Reference
6 Motor Running N.O. Relay 1A @24V
7 Motor Running Common
8 Reserved - Not Used
14 Speed Signal Voltage Output (0-10 V)
15 Remote Start/Stop Input
16 Remote CW/CCW Input
17 Remote Start/Stop, CW/CCW, Prime Ground Ref.
18 Tach Ground Reference
19 Tach Output (Open Collector)
20 Remote Prime Input
23 General Alarm Relay
24 Local/Remote Indicator Relay
10-12 Reserved - Not Used
21 General Alarm Common
25 Aux 24V+
13 Aux 24V-
Pin No.
DB-25
SAFETY
PRECAUTIONS
Explanation of
Symbols
WARNING:
Product Use
Limitation
DANGER: Remove power from the pump before any cleaning operation is started.
WARNINGS: Remove power from the pump before attempting any maintenance.
A contactor or other device that routinely disconnects and reapplies the AC line
to the drive to start and stop the motor can cause drive hardware damage. The drive is
designed to use control input signals that will start and stop the motor.
WARNINGS: Tubing breakage may result in fluid being sprayed from pump.
Use appropriate measures to protect operator and equipment.
Unplug Pump System before removing or installing tubing. Fingers or loose clothing
could get caught in drive mechanism.
CAUTIONS: Unplug Pump System before connecting the external remote control
cable to prevent damage to the drive.
CAUTIONS: To avoid electrical shock, the power cord protective grounding conductor
must be connected to ground. Not for operation in wet locations as defined by EN61010-1.
If the product is not used in a manner specified in the instructions, the protection provided
by the equipment may be impaired.
CAUTION: Risk of Danger. Consult Operator’s manual for nature of hazard and
corrective actions.
CAUTION: Risk of crushing. Keep fingers away from rotor while pump is in operation.
Stop pump before loading or unloading tubing.
CAUTION: Risk of electric shock. Consult Operator’s manual for nature of hazard and
corrective actions.
This product is not designed for, nor intended for use in patient connected
applications; including, but not limited to, medical and dental use, and accordingly
has not been submitted for FDA approval.
This product is not designed for, nor intended for use in hazardous duty areas as
defined by ATEX or the NEC (National Electrical Code); including but not limited to
use with flammable liquids.
Replacement Cord/Plug Sets Ordering Information
Catalog
number
50001-60
50001-62
50001-64
50001-68
50001-69
50001-70
50001-72
50001-74
50001-76
50001-78
—
Italy
U.S. 230V
—
Israel
Europe
England
Switzerland
n
o
it
p
i
r
c
s
e
D
n
o
it
p
i
r
c
s
e
D
Description
number
Catalog
number
Australia
Denmark
India
U.S. STD. 115V
—
—
Catalog
0.1 -
3
00 rpm
0
7525-20, -40
4.8 lb (2.2 kg)
77123-00
4.5 lb (2.0 kg)
9 Remote Voltage or Current Enable
10
BATCH COUNT
OFF TIME
11
EN
T
EN
T
RECORD COPY
EN
T
9
22 Local/Remote Indicator Common
07523-92
Footswitch w/DB-25 male connector
07523-94
DB-25 male connector for remote control
(connector only)
07523-95
Cable assembly, DB-25 male connector
and 25-ft (7.9m) cable w/stripped wire ends
07523-97
Dispensing wand DB-25 male connector
Product Accessories
1
2
3
8
COPY DISP. MODE
DUPLICAR DISP.
DISTR. REPETEE
WH.FÖRD.MOD.
MOD DIST COPIA
TUBING CAL
CAL DE TUBERÍA
ÉTALON. TUYAU
ROHRLEITUNGSKAL
TARATURA TUBI
07525-90
Power Supply, 24VDC output, 90 to 260 VAC input.
EN
T
9
EN
T
EN
T
COPY
EN
T
SETUP
MONTAJE
INSTALLATION
SETUP
IMPOSTAZIONE
セットアップ
EN
T
PUMP SPEED
EN
T
CONTINUOUS MODE
MODO CONTINUO
MODE CONTINU
DAUERMODUS
MOD CONTINUA
SETUP
MONTAJE
INSTALLATION
SETUP
IMPOSTAZIONE
セットアップ
PUMP DIRECTION
DIRECCIÓN BOMBA
DIRECTION POMPE
PUMPRICHTUNG
DIREZIONE POMPA
FLOW RATE
CAUDAL
DÉBIT
DURCHFLUSSRATE
INDICE DI FLUSSO
KEYPAD LOCKOUT
BLOQUEO DE TECLADO
VERROUILLAGE CLAV.
TASTENFELDSPERRE
BLOCCO DEI TASTI
REMOTE CONTROL
CONTROL REMOTO
TÉLÉCOMMANDE
FERNBEDIENUNG
CONTROLLO REMOTO
FLOW UNITS
UNIDADES DE FLUJO
UNITÉS DE DÉBIT
DURCHFLUSSEINHEIT
UNITÀ DI FLUSSO
BACK
START/STOP
INICIO/DETENCIÓN
DÉMARRER/ARRÊTER
START/STOPP
AVVIO/ARRESTO
/
/
PRIME
CEBAR
AMORÇER
ANSAUGEN
ADESCARE
Graphic Interface Keypad Legend
6
4
5
ENTER
ENTRE
ENTRER
EINGABE
INSERIRE
PUMP RUNNING
EN
T
SETUP
MONTAJE
INSTALLATION
SETUP
IMPOSTAZIONE
セットアップ
FLOW UNITS
UNIDADES DE FLUJO
UNITÉS DE DÉBIT
DURCHFLUSSEINHEIT
UNITÀ DI FLUSSO
TUBING SIZE
TAMAÑO DEL TUBO
TAILLE DU TUYAU
ROHRLEITUNGSGR.
DIMENSIONE TUBI
EN
T
EN
T
EN
T
7
FLOW RATE
CAUDAL
DÉBIT
DURCHFLUSSRATE
INDICE DI FLUSSO
Description
1
Speed Control Voltage Input (0-10V)
2
Speed Control Current Input (0-20 mA)
3
Speed Control Input Ground Return
4
Speed Signal Current Output (0-20 mA)
5
Speed Signal Output Ground Reference
6
Motor Running Relay (N.O.)
7
Motor Running, Relay Common
8
Reserved - Not Used
14
Speed Signal Voltage Output (0-10V)
15
Remote Start/Stop Input
16
Remote CW/CCW Input
17
Remote Start/Stop, CW/CCW, Prime, Local/Remote Grnd Ref.
18
Tach Ground Reference
19
Tach Output (Open Collector)
20
Remote Prime Input
9
Remote Voltage or Current Enabled
23
General Alarm Relay
24
Local/Remote Indicator Relay
10-12
Reserved - Not Used
21
General Alarm Relay Common
22
Local/Remote Indicator Relay Common
25
Aux 24V+ (150 mA)
13
Aux 24V- (150 mA)
Pin No.
DB-25
SAFETY
PRECAUTIONS
Explanation of
Symbols
WARNING:
Product Use
Limitation
DANGER: Remove power from the pump before any cleaning operation is started.
WARNINGS: Remove power from the pump before attempting any maintenance.
A contactor or other device that routinely disconnects and reapplies the AC line to
the drive to start and stop the motor can cause drive hardware damage. The drive is
designed to use control input signals that will start and stop the motor.
WARNINGS: Tubing breakage may result in fluid being sprayed from pump. Use
appropriate measures to protect operator and equipment.
Unplug Pump System before removing or installing tubing. Fingers or loose cloth-
ing could get caught in drive mechanism.
CAUTION: Unplug Pump System before connecting the external remote control
cable to prevent damage to the drive.
CAUTIONS: To avoid electrical shock, the power cord protective grounding conduc-
tor must be connected to ground. Not for operation in wet locations as defined by
EN61010-1.
If the product is not used in a manner specified in the instructions, the protection
provided by the equipment may be impaired.
CAUTION: Risk of Danger. Consult Operator’s manual for nature of hazard and cor-
rective actions.
CAUTION: Risk of crushing. Keep fingers away from rotor while pump is in opera-
tion. Stop pump before loading or unloading tubing.
CAUTION: Risk of electric shock. Consult Operator’s manual for nature of hazard
and corrective actions.
This product is not designed for, nor intended for use in patient connected applications;
including, but not limited to, medical and dental use, and accordingly has not been submitted for
FDA approval.
This product is not designed for, nor intended for use in hazardous duty areas as defined by ATEX
or the NEC (National Electrical Code); including, but not limited to use with flammable liquids.
BATCH COUNT
CONTEO DE LOTE
COMPTAGE DE LOT
FÜLLSTAND
CONTA LOTTO
批次数
バッチカウント
RECORD COPY
COPIA DE REGISTRO
ENREGISTRER COPIE
WIEDERHOLUNG AUFZEICHNEN
REGISTRA COPIA
复制记录
記録のコピー
EN
T
EN
T
EN
T
EN
T
EN
T
EN
T
50001-60
50001-62
50001-64
50001-68
50001-69
50001-70
50001-72
50001-74
50001-76
50001-78
—
Italy
U.S. 230V
—
Israel
Europe
England
Switzerland
Replacement Cord/Plug Sets Ordering Information
Catalog
number
Description
Description
Description
Catalog
number
Catalog
number
Australia
Denmark
India
U.S. STD. 115V
1
24 23 22 21 20 19 18 17 16 15 14
13 12 11 10 9
8
7
6
5
4
3
2
25
2
year
warranty
70 dba @ 1M
-25C, -13F
+65C, +149F
+0C, +32F
+40C, +104F
EN61010-1:2010 L.V. DIR.
EN61326-1:2013 EMC DIR.
EN610000-4-2 Criteria C
EN60529 / IEC 60034-5
07525-20, -40
4.8 lbs (2.2 kg)
77123-00
4.5 lbs (2.0 kg)
IP
0.01-300 rpm
33