MasterCraft SC20BST, Инструкция по эксплуатации

Страница: 20 / 24

headline bars
continuation tabs
notes
warnings
model no. SC20BST | contact us 1-800-689-9928
20
TROUBLESHOOTING
Problem Possible causes Solutions
The trimmer doesn’t
work. The battery is depleted. Charge the battery pack.
The battery pack is overloaded. Decrease the load on the trimmer.
The battery pack is too hot. Cool the battery pack and then restart
the tool again.
Trimmer head will not
advance line. The motor shaft or trimmer head is
bound with grass. Stop the trimmer, remove the battery,
and clean the motor shaft and trimmer
head.
Cutting line is not wound well. The line
is tangled. Manually feed the line first. If the line
still cannot feed out, rewind the line.
There is not enough line on the spool. Replace the cutting line. Follow the
section “WIND THE SPOOL WITH NEW
LINE” in this manual.
Excessive vibrations/
noise. Line spool is not wound well. Rewind the line.
If the problem remains unsolved after performing the checks described above, call the toll-free helpline
at 1-800-689-9928.
TROUBLESHOO
TING