G
ROUNDING
I
NSTRUCTIONS
Improper use of the grounding plug can result
in a risk of electric shock.
Electrical equipment must be grounded. If
it should malfunction or breakdown,
grounding provides a path of least resist-
ance for electrical current to reduce the
risk of electric shock. This vacuum is
equipped with a cord having an equip-
ment-grounding conductor and ground-
ing plug. The plug must be inserted into an
appropriate outlet that is properly installed
and grounded in accordance with all local
codes and ordinances.
If repair or replacement of the cord or plug
is necessary, DO NOT connect the ground-
ed wire to either flat blade terminal. The
wire with insulation having an outer sur-
face that is green with or without yellow
stripes is the grounding wire.
G
ROUNDING
M
ETHODS
This electric equipment is for use on a
nominal 120 volt circuit, and has a
grounded plug that looks like the plug
illustrated in (Fig A). A temporary adaptor
that looks like the adaptor illustrated in
(Fig B & C) may be used to connect this
plug to a 2-pole receptacle as shown in
(Fig B) if a properly grounded outlet is not
available.
The temporary adaptor should be used
only until a properly grounded outlet (Fig
A) can be installed by a qualified electri-
cian. The green color rigid ear, lug or the
like extending from the adaptor must be
connected to a permanent ground such
as a properly grounded outlet box cover.
Whenever the adaptor is used, it must be
held in place by a metal screw. (Fig C)
Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician or service
person if you are in doubt as to whether the outlet is properly grounded.
DO NOT modify the plug provided with the equipment. If it will not fit the
outlet, have a proper outlet installed by a qualified electrician.
Note: In Canada, the use of a temporary adaptor is not permitted
by the Canadian Electrical Code.
P
AGE
3
This vacuum has been specifically
designed for use in hospital clean rooms.
Special filters reduce the incidence of air-
borne dust that would be created by other
methods of cleaning.
During removal of contaminated dust,
DO NOT sweep, scoop, shovel or in any
manner handle other than by vacuum-
ing.
DO NOT at any time attempt to remove,
substitute, bypass or by any other means
change the filters in the vacuum.
Use only manufacturer’s approved vacuum
filters and filters bags.
Before attempting to use or before cleaning
with this vacuum, be sure that you fully
understand the instructions for setting up
or cleaning/changing filters.
Any health hazards associated with use of
this vacuum in conjunction with the
removal of contaminated material has not
been investigated by Underwriters
Laboratories, Inc.
I
NTENDED
U
SE
O
F
T
HIS
V
ACUUM
WARNING:
DANGER: