MasterCraft 54-8110-2, Руководство пользователя

Страница: 15 / 27

15
SETTING THE BEVEL CUTTING ANGLE
–
cont’d
2. Bevel angles (3) are marked on a
scale located on the rear of the base
(Fig. 6).
3. Align the bevel angle index mark (4)
with the desired bevel angle on the
rear of the base.
NOTE: Use a protractor to check the bevel
angle between the blade and the base.
4. Once desired bevel angle is obtained,
lock the base by tightening base pivot
screws.
5. Make a test cut in a scrap piece of
material and measure the bevel angle.
Adjust bevel angle if necessary.
SETTING THE ORBITAL CUTTING
ANGLE
The variable orbital cutting action allows
you to select one of four different blade
angles.
To set the orbital cutting angle, move the
orbital cutting button forward or backward
to the desired setting number (1) (Fig. 7).
NOTE:
The orbital setting button will “click”
at each of the four positions. Slide the
orbital button slightly forward or backward
until it locks into place.
Fig. 6
ASSEMBLY AND OPERATING
Position Angle Material
0 Neutral Metal
1 Small Hard wood
2 Medium Medium
hard wood
3 Full Soft wood
Fig. 7