MasterCraft 54-6621-8, Руководство пользователя

Страница: 7 / 28

7
WARNING:
Know your palm
planer. Read the Instruction Manual
carefully. Learn the tool’s applications
and limitations, as well as the specific
potential hazards related to this tool.
Following this rule will reduce the risk of
electric shock, fire or serious injury.
Always wear eye protection. Any power
tool can throw foreign objects
into your eyes and cause
permanent eye damage.
ALWAYS wear safety goggles
(not glasses) that comply with ANSI safety
standard Z87.1. Everyday glasses have
only impact resistant lenses. They ARE
NOT safety glasses.
WARNING:
Glasses or goggles
not in compliance with ANSI Z87.1
could cause serious injury when they
break.
Always wear hearing protection and a dust
mask. Use only in a well-ventilated area.
Using personal safety devices and working
in a safe environment reduces the risk of
injury.
DANGER:
Always unplug the tool
from the power source before making
any adjustments or removing the
blades.
DANGER:
Be extremely careful
when handling the cutting blades. They
are extremely sharp and can cause
serious injury.
DANGER:
Always make sure the
blade clamping screws are correctly
tightened before using the planer.
DANGER:
Use only Mastercraft
®
replacement cutting blades. Any other
cutting blades may not be clamped
properly in the cylinder and could be
violently thrown, causing serious injury
to the operator.
DANGER:
When turning the
planer ON, watch for excessive
vibration which could be caused by
loose or improperly installed cutting
blades.
Never use dull or damaged cutting blades.
Dull or damaged cutting blades require
more power to operate and could result in
overheating the motor. They will also result
in poor cutting action and a rough finish.
Always replace both blades at the same
time to maintain proper cylinder balance
and smooth cutting action.
Always make sure the work surface is free
of nails and other foreign objects. Cutting
into a nail can cause the tool to jump. It will
also damage the cutting blades.
Always use a safe method to secure the
workpiece. Use both hands to guide the
tool wherever possible. Never place hands
near the cutting blades.
Never lay the workpiece on hard surfaces
such as concrete, stone, etc. The tool may
jump if the cutting blades contact the hard
surface. The blades will also be damaged.
Make sure all rags, cords, string etc. are
removed from the work area. Any of these
items could be caught in the cutting blades
and cause loss of control over the tool.
Never operate the palm planer while
covering the air vents with your hands. The
motor will overheat.
SPECIFIC SAFETY RULES
!
!
!
!
!
!
!
!