background image

limited warranty

 

statement

1. 

Limited Warranty and Term.

 

MasterCraft Boat Company, LLC. 

(“MasterCraft”) warrants to the origi-

nal retail purchaser that the following 

components of each new boat shall be 

free from material defects in materi-

als and workmanship to the extent set 

forth below, under normal use and 

when operated and maintained in ac-

cordance with MasterCraft’s instruc-

tions, for the period indicated:

1.1 

Deck, Hull, Liner and Stringers

From the date of the original re-

tail purchase, the deck, hull, liner 

and stringer system (collectively, 

“Structural Components”) is war-

ranted for as long as the original 

purchaser owns the boat.

1.2 

Gel Coat.

 On condition that the consumer has provided 

maintenance and care as described in the 

Corrosion

 and 

Cleaning the Boat

 sections of the MasterCraft Owner’s 

Manual, the gel coat, which is applied to all MasterCraft 

boats at the factory, will be warranted for a period of one 

(1) year from the date of the original retail purchase of 

the boat or the initial use of the boat, whichever first oc-

curs, for stress crazing of the gel coat. However, no war-

ranty is provided, and MasterCraft expressly disclaims 

any warranty for, scratching, discoloration or fading of 

the gel coat because environmental operating conditions 

and customer maintenance/care are factors that have a 

significant effect on the condition and durability of the 

gel coat.

1.3 

Other Component Parts (Excluding Engine and Trans-

mission.

 MasterCraft provides the following warranty for 

other component parts of your MasterCraft boat:

(a)  Instrumentation is warranted for three (3) years, 

except depth finders and Perfect Pass; 

(b)  marine carpeting for five (5) years; 

(c)   upholstery vinyl for five (5) years; and

(d)  fuel pump assembly for two (2) years provided the 

customer follows maintenance and care require-

ments. 

 

All other components (excluding engine and transmis-

sion), including upholstery stitching, are warranted for a 

period of one (1) year. All warranties are from the date of 

the original retail purchase of the boat or the initial use 

of the boat, whichever first occurs.

1.4 

Trailer and Trailer Component Parts.

 The brake cali-

pers are warranted for a period of two (2) years; all other 

components are warranted for a period of one (1) year 

from the date of the original retail purchase of the boat 

or the initial use of the boat, whichever first occurs. See 

the Trailer Owner’s Manual for more details.

2. 

Engine and Transmission.

 The engines used in MasterCraft 

boats are supplied by Indmar Products Company, Inc., in 

Millington, Tennessee (“Indmar”); or Volkswagen Marine 

Engines in Tampa, Florida (“Volkswagen Marine”). These 

companies provide a separate warranty of three (3) years 

from the date of the original retail purchase of the boat or 

the initial use of the boat, whichever first occurs, for the 

engine and transmission. A statement of the Indmar Power 

Train Warranty or the Volkswagen Marine Warranty is pro-

vided separately to the original retail purchaser. MasterCraft 

provides no independent warranty with regard to the engine 

and transmission; however, the owner may contact Master-

Craft at the address or telephone number listed in Section 

7 of this Limited Warranty to obtain contact information 

for making claims or inquiries under the applicable engine 

manufacturer’s warranty. Contact information for Volkswa-

gen Marine is provided in the warranty statement provided 

at the time of purchase to the original retail purchaser.

3. 

Warranty Conditions, Limitations and Exclusions.

 Master-

Craft boats are manufactured by trained craftspersons from 

high-quality materials and components. However, conditions 

outside MasterCraft’s control require specific limitations on, 

and exclusions from, coverage under this Limited Warranty. 

The Limited Warranty on the Structural Components set 

forth in Section 1 of this Manual does not cover or include 

any other components fastened or applied to the hull or deck. 

This Limited Warranty constitutes the final, complete and 

exclusive statement of warranty terms, and no other person or 

entity is authorized to make any other warranties or represen-

tations on behalf of MasterCraft. Furthermore, the Limited 

Warranty set forth in Section 1 (including all subsections) 

hereof does not cover the following:

MasterCraft 2009 Owner’s Manual - Page 21-1

Содержание 2009 MariStar X-Series

























































































Отзывы: