STEP 9 ATTACH THE SOLID WOOD TOP AND SECURE TO WALL
•
Attach the rubberwood top (35) to the cabinet top by inserting six M6 x 16 hex socket head screws (4)
through the pre-drilled holes underneath. Tighten securely.
•
At the same time, square up the cabinet and make sure the inner diagonal lines are equal with the
help of a measuring tape. Tighten all screws on front and back.
•
Move the cabinet on a flat floor against a wall. Use a power drill to attach the cabinet to the wall
with two M6 x 40 hex tapping bolts (36) through the holes at the back top beam (37).
Tighten securely. For safety, the bolts shall be drilled into the studs of the wall.
1
STEP 10 ASSEMBLE THE DRAWERS
NOTE:
Make sure your platform is free of debris or the drawer bottom is protected before
laying the drawer on its bottom.
Lay the drawer panel (6) on its bottom.
•
•
Bend up the side panels upright to 90
°
. During this process, insert the clips at the two ends
of the back panel into the slots of the side panels.
Bend all the clips towards the back panel until they lean against the back panel.
•
Back
37
36
Wall
Back
ASSEMBL
Y INSTRUCTIONS
11
4
35
