MasterCraft 062-3413-2 Скачать руководство пользователя страница 10

model no. 062-3413-2  |  contact us 1-800-689-9928

OPERATION INSTRUCTIONS

2

3

Storing the Pump:

Protect against flooding and 
excessive moisture by storing in a 
dry place.

Draining the Pump for Winter: 

a. Disconnect the suction (1) and 

discharge (2) lines from the 
pump (A).

b. Remove the water drain plug (3) 

from the pump (A).

c. Drain all piping below the frost 

line or store the piping indoors.

d. Store the pump indoors.

Running the Pump

Plug the power cord into a GFCI-protected  
electrical outlet and press the power switch 
to the On position. If the pump does not 
pump water within 2 minutes, turn the pump 

(A) off. Refill with clean water and make sure 

all connections are airtight. To turn the pump 
off, press the power switch to the off 
position.

DANGER: Risk of electric shock. Always 

disconnect the electrical supply before 
attempting to install, service, or perform any 
maintenance. If the power source is out of 

sight, lock and tag in the open (off) position 

to prevent unexpected power application. 
Failure to do so could result in fatal electrical 

shock. Only qualified electricians should 

repair this unit. Improper repair could result 

in fatal electric shock.

WARNING: Let the pump cool for at least 20 
minutes before attempting to service. The 
motor may be extremely hot. Personal injury 
may result.

10

A

A

1

2

3

Содержание 062-3413-2














Отзывы: