MasterCraft 060-0591-8, Инструкция по эксплуатации, Страница: 8 / 20

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
8
model no. 060-0591-8 | contact us 1-800-689-9928
SAFETY GUIDELINES
• Do not expose a battery pack or tool to fire or excessive temperature.
Exposure to fire or
temperature above 130°C (265°F) may cause explosion.
• Follow all charging instructions and do not charge the battery pack or tool outside the
temperature range specified in the instructions. Charging improperly or at temperatures
outside the specified range may damage the battery and increase the risk of fire.
SERVICE
• Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
• Never service damaged battery packs. Service of battery packs should only be performed by
the manufacturer or authorized service providers.
HEDGE TRIMMER SAFETY WARNINGS
• Keep all parts of the body away from the blade. Do not remove cut material or hold
material to be cut when blades are moving.
Blades continue to move after the switch is
turned off. A moment of inattention while operating the hedge trimmer may result in serious
personal injury.
• Carry the hedge trimmer by the handle with the blade stopped and taking care not
to operate any power switch.
Proper carrying of the hedge trimmer will decrease the risk of
inadvertent starting and resultant personal injury from the blades.
• When transporting or storing the hedge trimmer, always fit the blade cover.
Proper
handling of the hedge trimmer will decrease the risk of personal injury from the blades.
• When clearing jammed material or servicing the unit, make sure all power switches
are off and the battery pack is removed or disconnected.
Unexpected actuation of the
hedge trimmer while clearing jammed material or servicing may result in serious personal injury.
• Hold the hedge trimmer by insulated gripping surfaces only, because the blade may
contact hidden wiring. Blades contacting a “live” wire may make exposed metal parts of the
hedge trimmer “live” and could give the operator an electric shock.
• Keep all power cords and cables away from cutting area.
Power cords or cables may be
hidden in hedges or bushes and can be accidentally cut by the blade.
• Do not use the hedge trimmer in bad weather conditions, especially when there is a
risk of lightning. This decreases the risk of being struck by lightning.
ADDITIONAL SAFETY GUIDELINES
• The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
V ..................... Volts
A ..................... Amperes
min ................. Minutes
or d.c ..... Direct current