11
10
Compatible compressors
Air system
General use
GUIDELINES FOR PROPER USE AND OPERATION
Potential hazard that could result in serious injury or death
.
Be sure to use a proper air compressor with Mastercraft
®
air-powered tools. The
compressor should be able to supply a minimal air delivery of 2.0 CFM@ 90 PSI to ensure
the compressor can run continuously with the Mastercraft
®
Air-powered Pin Nailer.
Air Compressor
Size and Power
Wood Density
Nail Size
Compressor Air Pressure
0.6g/cm
3
0.6g/cm
3
Quick connector
Quick coupler
Air hose
Lubricator
Regulator (0 to 8.5 bar)
Filter
Cut-off valve
Air compressor
Always use clean, dry, regulated, compressed air at 4.8 to 7.5 bar (70 to 110 PSI).
Do not exceed the maximum or minimum pressures. Operating the tool at the wrong
pressure (too low or too high) will cause excessive noise or rapid wear.
WARNING!
Keep hands and other parts of the body away from the tool’s discharge
and working areas when connecting the air supply. Failure to comply
could lead to serious injury or death.
Heavy-duty and
continuous use
Medium-duty and
intermittent use
Light-duty and
intermittent use
Light-duty and
intermittent use
Light-duty and
intermittent use
Light-duty and
intermittent use
Medium-duty and
intermittent use
Medium-duty and
intermittent use
Medium-duty and
intermittent use
15+ Gallons
8–11 Gallons
2–6 Gallons
1/3–1 1/3 HP
1 1/2–2 HP
2+HP
TECHNICAL INFORMATION
TECHNICAL INFORMATION
90 PSI (6.3 bar)
100 PSI (7 bar)
70 PSI (4.8 bar)
90 PSI (6.3 bar)
Mastercraft® Air-powered Brad Nailer
<1 1/4”(32 mm) brad nails
<1 1/4”(32 mm) brad nails
<1 1/4”(32 mm) brad nails
<1 1/4”(32 mm) brad nails
model no. 058-8691-0 | contact us 1-800-689-9928
This Mastercraft
®
Air-powered Brad Nailer includes a die cast aluminum body that is strong and
lightweight, and a comfort grip rubber handle for improved control and comfort, even during
extended use. The tool has a magazine that accepts 18-gauge and 5/8 - 2" (15 to 50 mm) long
brad nails, without adjustment. A hardened one-piece drive blade is provided for professional
application, and an adjusting wheel for controlling the depth of the nails. A touch-strike security
system is included for ensuring safety of the operator. The tool features a 360º air deflector that
is adjustable in any direction, and a quick-release handle for clearing jams. The Air-powered
Brad Nailer is best suited for installing door and window trim, decorative trim, cabinet work,
finish paneling, framing, scribe molding, upholstery, beading, chair rail, flooring works, etc.