MasterCraft 058-8122-6 Скачать руководство пользователя страница 5

SAFETY GUIDELINES

5

AIR

-

POWERED PIN NAILER  058

-

8122

-6

SAFETY GUIDELINES

DANGER!

Potential hazard that will result in serious injury or loss of life.

Keep children away from the work area. Do not allow children to handle 
power tools.

Do not use this tool in the presence of flammable liquids or gases. Sparks 
that are created during use may ignite gases.

Do not point the tool towards yourself or other people, even when the tool 
has stopped. Keep hands, feet, and all other parts of the body clear from 
work area.

Do not attempt to clear nailer jams while the air hose is connected.

Do not keep the trigger or the safety stand pressed while loading nails. 
Unintentional firing of a nail could cause serious personal injury or death.

Do not disconnect or reconnect the air hose with the trigger pressed. The 
Air

-

powered Pin Nailer may fire when it is reconnected to the air supply.

Do not use oxygen or any other combustible or bottled 
gas to power air-powered tools. Failure to observe this 
warning can cause explosion and serious personal injury 
or death. Use only the compressed air to power air-
powered tools. Use a minimum of 25

'

 (7.6 m) of hose to 

connect the tool to the compressor. Failure to comply will 
result in serious injury or loss of life.

Risk of inhalation: Never directly inhale the air produced by the compressor. 

Oxygen

Hydrogen

Explosive

Combustible

MC-OM-02

Содержание 058-8122-6






























Отзывы: