MasterCraft 058-7936-6 Скачать руководство пользователя страница 9

MAINTENANCE 

   

To avoid personal injury, always shut off and unplug the unit and relieve all 

air pressure from the system before performing any service on the air compressor. 

 

Regular maintenance will ensure trouble-free operation. The items listed in the chart should be inspected on 

a regular basis. 

 

ITEM DESCRIPTION/REASON 

SERVICE 

INTERVAL 

Drain the tank. 

Through normal operation of your air compressor, 

condensation water will accumulate in the tank.  To 

prevent corrosion of the tank from the inside, 

condensation must be drained at the end of every 

workday. Be sure to wear protective goggles. Relieve 

the air pressure in the system and open the drain valve 

on the bottom of the tank to drain.    In cold conditions, it 

is especially important to drain the tank after each use 

to reduce the chance of problems resulting from the 

freezing of condensation water.

 

Daily 

Check the relief valve. 

Pull/activate the relief valve daily to ensure that it is 

operating properly and to clear the valve of any possible 

obstructions. 

Daily 

Clean the air filter. 

A dirty air filter will reduce air compressor performance 

and life. 

To avoid any contamination of the inside pump, the filter 

should be cleaned frequently and replaced on a regular 

basis. Foam filters should be cleaned in warm and 

soapy water. 

Weekly 

Test for leakages. 

Check that all connections are tight. Small leaks in any 

of the tank, hoses, connections or transfer tubes will 

substantially reduce the air compressor and tool 

performance. 

Spray a small amount of soapy water around the area of 

suspected leaks with a spray bottle. If bubbles appear, 

repair, replace or re-seal the faulty component. Do not 

over tighten any connections. 

Monthly 

Storage. 

Before storing the unit for a long period, use an air blow 

gun to clean all dust and debris from the air compressor. 

Disconnect and coil the power cord up. Clean the filter 

element and filter housing. Drain all moisture from the 

tank. Pull the pressure relief valve to release all 

pressure from the tank. Cover the entire unit to protect it 

from moisture and dust. 

N/A 

 

- 9 - 

Содержание 058-7936-6














Отзывы: