headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
12
model no. 054-8255-8 | contact us 1-800-689-9928
INSTALL A SAW BLADE
(fig 2)
1. Remove the battery pack from the saw.
2. Pivot the blade-clamp lever to open the blade
clamp.
3. Insert the saw blade into the blade clamp as far
as possible, then release the blade-clamp lever
to lock the blade in position.
4. Check that the blade is securely attached.
REMOVE A SAW BLADE (
fig 2)
1. Remove the battery pack from the saw.
2. Pivot the blade-clamp lever to open the blade clamp.
3. Remove the saw blade from the blade clamp.
BASE SHOE ADJUSTMENT
(fig 3)
For maximum control and longer blade life, the
base shoe assembly slides in and out to adjust the
effective cutting length.
1.
Remove the battery pack from the saw.
2.
Use the hex wrench (included) to loosen the two
screws on the bottom of saw housing.
3.
Adjust the base shoe to the desired position and
retighten both screws.
PIVOTING THE SHOE
(fig 4)
The base shoe pivots to provide maximum contact
with the surface being cut.
1.
Remove the battery pack from the saw.
2.
Hold the saw securely, and then pivot the base shoe
to the desired angle.
OPERA
TING INSTRUCTIONS
fig 2
Blade-clamp lever
fig 4
Shoe
fig 3
Base shoe
Hex wrench
WARNING!
• Never touch the saw blade immediately after use. It may be hot after prolonged use.
• After adjusting the base shoe, two locking screws should be fully retightened, otherwise the base shoe will become loose
during the operation.
• To avoid injury and damage, do not operate the saw without the base shoe in place. The spindle may strike against the
workpiece and damage the reciprocating mechanism.
FPO
Open
