headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
11
WARNING!
• To avoid the possibility of accidental starting, always take care to lock the variable-speed trigger switch by
placing the direction-of-rotation selector in the centre (locked) position when you are attaching the battery
pack or performing other adjustments to the tool.
FPO
OPERA
TING INSTRUCTIONS
NOTICE:
When placing a battery pack on the tool, be sure that the raised rib on the battery pack aligns with the groove on
the cordless impact driver and the latches snap into place properly. Improper assembly of the battery pack can cause damage to
internal components.
OPERATING INSTRUCTIONS
TO ATTACH BATTERY PACK
(fig 1)
1. Lock the variable-speed trigger switch on the
impact driver by placing the direction-of-rotation
selector (forward/centre-lock/reverse) in the
centre position.
2. Align the raised rib on the battery pack with the
grooves of the impact driver, and then attach the
battery pack to the impact driver.
3. Make sure that the latch on the battery pack
snaps into place, and that the battery pack is
attached securely to the tool before beginning operation.
TO DETACH THE BATTERY PACK
(fig 1)
1. Lock the variable-speed trigger switch on the impact driver by placing the direction-of-rotation selector
(forward/centre-lock/reverse) in the centre position.
2. Depress the battery-release button, located on the front of the battery pack, to release the battery pack.
3. Pull the battery pack out and remove it from the tool.
fig 1
Battery-release
button
ATTACH
DETACH
