headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
8
model no. 054-7285-2 | contact us 1-800-689-9928
temperature above 130ºC (266ºF) may cause explosion.
•
Follow all charging instructions and do not charge the battery pack or tool outside the
temperature range specified in the instructions.
Charging improperly or at temperatures
outside the specified range may damage the battery and increase the risk of fire.
SERVICE
•
Have your power tool serviced by a qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
•
Never service damaged battery packs.
Service of battery packs should only be performed by
the manufacturer or authorized service providers.
SAFETY GUIDELINES FOR CORDLESS POLISHER
•
Hold power tools by insulated gripping surfaces when performing an operation where
the tool may contact hidden wiring or its own cord.
Contact with a “live”wire may make
exposed metal parts of the power tool “live” and could give the operator an electric shock.
•
To reduce the risk of electric shock or damage to the charger and battery, use only
the Mastercraft
®
batteries and charger listed.
Read the manuals of the charger and battery
before using.
BATTERY PACK
CHARGER
054-3124-0, 054-7553-4,
054-7557-6, 054-2434-8
054-3126-6, 054-7559-2
•
For your safety, do not attach the battery pack or try use it until the tool is completely
assembled according to these instructions, and until you have read and understood
this operators manual.
•
For best results, your battery tool should be stored, used and charged in a location
where the temperature is more than 5°C (41°F) but less than 40°C (104°F).
Do not store
outside or in vehicles.
•
Always keep hands out of the path of polisher.
Avoid awkward hand positions where
sudden slip could cause your hand to move into the polisher.
•
Secure the workpiece.
Use clamps or vice to hold the work when practical.
•
Make sure there are no nails or foreign objects in the part of the workpiece to be
sanded.
•
Protect your eyes, wear safety goggles.
The operation of any cutting tool can result in foreign
objects being thrown into your eyes. This can result in severe eye damage. Before beginning any
power tool operation, always wear safety goggles or safety glasses with side shields and a full
face shield. When needed, a wide vision safety mask should be used over eyeglasses or standard
safety glasses with side shields. Glasses have only impact-resistant lenses and ARE NOT safety
glasses. For your own protection, make sure your safety glasses or goggles comply with the
ANSI Z87.1 Safety Standard.
SAFETY GUIDELINES
