ANGLE GRINDER - 054-7120-4
9
• Never place your hand near the rotating accessory.
The accessory may kickback over your
hand.
• Do not position your body in the area where the power tool will move if kickback occurs.
Kickback will propel the tool in the direction opposite to the wheel’s movement at the point of
snagging.
• Use special care when working corners, sharp edges, etc. Avoid bouncing and snagging
the accessory.
Corners, sharp edges or bouncing have a tendency to snag the rotating accessory
and cause loss of control or kickback.
• Do not attach a saw chain, woodcarving blade or toothed saw blade.
Such blades create
frequent kickback and loss of control.
Additional safety instructions for grinding operations
• Use only wheel types that are recommended for your power tool and the specific guard
designed for the selected wheel.
Wheels for which the power tool was not designed cannot be
adequately guarded and are unsafe.
• The guard must be securely attached to the power tool and positioned for maximum
safety, so the least amount of wheel is exposed towards the operator.
The guard helps to
protect the operator from broken wheel fragments, accidental contact with wheel and sparks that
could ignite clothing.
• Wheels must be used only for recommended applications. For example: do not grind with
the side of cut-off wheel.
Abrasive cut-off wheels are intended for peripheral grinding; side forces
applied to these wheels may cause them to shatter.
• Always use undamaged wheel flanges that are of the correct size and shape for your
selected wheel.
Proper wheel flanges support the wheel, thus reducing the possibility of wheel
breakage. Flanges for cut-off wheels may be different from grinding wheel flanges.
• Do not use worn down wheels from larger power tools.
A
wheel intended for a larger power
tool is not suitable for the higher speed of a smaller tool and may burst.
Contents:
Angle grinder, side handle, wrench, 4 1/2" grinding wheel and instruction manual.
WARNING!
Remove the angle grinder from the package and examine it carefully. Do not discard the
carton or any packaging material until all parts have been examined.
SAFETY GUIDELINES