MasterCraft 054-4273-8, Инструкция по эксплуатации

Страница: 11 / 20

headline bars
continuation tabs
notes
warnings
11
ASSEMBLY INSTRUCTIONS
TO ATTACH BATTERY PACK (fig 1)
1. Turn off the lock button.
2. Align the raised portion on the battery pack with the
groove on the bottom of the tool, then silde the battery
pack into the body of the tool.
3. Make sure that the battery latches securely.
TO DETACH BATTERY PACK (fig 1)
1. Make sure that the lock button is turned off.
2. Depress the battery-release button located on the front of the battery pack to release the battery pack.
3. Pull the battery pack forward to remove it from the tool.
INSTALLING AND REMOVING
A SOCKET (fig 2)
1. Make sure that the lock button is turned off.
2. To install a socket, slide it onto the drive anvil and
simply push it until it locks in place.
3. To remove a socket, pull it off the anvil.
•
ASSEMBL
Y INSTRUCTIONS
CAUTION!
• Avoid the possibility of accidental starting. Always make sure that the lock button is turned off when you
are attaching the battery pack or performing other adjustments to the tool.
• Bits, sockets and tools get hot during operation. Wear gloves when touching them after use.
• Only use sockets designed for impact ratchet. Other sockets could break and result in user injury. Inspect a
socket prior to use to ensure that they have no cracks or other visible damage.
FPO
NOTICE:
When placing a battery pack on the tool, be sure that the raised rib on the battery pack aligns with the groove on
the cordless impact ratchet and the latches snap into place properly. Improper assembly of the battery pack can cause damage
to internal components.
fig 2
fig 1
Latch
ATTACH
DETACH