MasterCraft 054-3121-6, Инструкция по эксплуатации

Страница: 5 / 12

7 8
20V max* LIThIUM-ION COMpACT CORdLeSS IMpACT WReNCh - 054-3121-6 20V max* LIThIUM-ION COMpACT CORdLeSS IMpACT WReNCh - 054-3121-6
SAFE
tY G
ui
DEL
in
ES
SAFE
tY G
ui
DEL
in
ES
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, also seek medical
help.
Liquid ejected from the battery may cause irritation or burns.
Service
• Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Safety guidelines for cordless impact wrench
• Hold power tools by the insulated gripping surfaces when performing an operation where
the tool may contact hidden wiring or its own cord. Contact with a “live” wire may make
exposed metal parts of the power tool “live” and could give the operator an electric shock.
• Use clamps or another practical way to support and secure the workpiece to a stable
platform.
holding the work by hand or against your body is unstable and may lead to loss of control.
• Do not drill, fasten or break into existing walls or other blind areas where electrical wiring
may exist.
If this situation is unavoidable, disconnect all fuses or circuit breakers feeding the worksite.
• Always wear safety goggles or eye protection when using this tool.
• Bits, sockets and tools get hot during operation.
Wear gloves when touching them after use.
• Wear ear protectors when using the tool for extended periods. prolonged exposure to high
intensity noise can cause hearing loss.
• Use thick, cushioned gloves and limit the exposure time by taking frequent rest periods.
Vibration caused by the impact wrench action may be harmful to your hands and arms.
• Secure the material being fastened. Never hold it in your hand or across your legs. Unstable
support can cause loss of control and injury.
• Avoid accidental starting. Be sure that the forward/centre-lock/reverse switch is in the “off”
(centre) position before inserting the battery pack. Carrying appliances with your finger on the switch
or inserting the battery pack into an appliance with the switch on invites accidents.
• Remove the battery pack before changing accessories. Accidental starting may occur because
battery appliances with a battery inserted are in the operative condition.
• Be prepared for a reaction torque when “seating” or removing a fastener. The tool housing
may tend to twist in the opposite direction of the bit rotation when “seating” or removing a fastener,
depending on the torque setting of the tool.
• Do not use worn or damaged impact sockets and accessories.
When installing an accessory,
insert the impact socket well onto the anvil. Be sure that the anvil has locked onto the socket correctly.
• Do not run the tool while carrying it at your side.
A spinning bit could become entangled with
clothing and injury may result.
• Place the tool onto the fastener only when the tool is switched off. Rotating wrench tools
can slide off of the fastener.
• Be careful when driving long screws.
There is a risk of the impact wrench sliding off the
fastener head, depending on the type of socket or bit used. First test the run-down of a fastener and
pay attention during the driving process to ensure that you do not injure yourself if the tool bit or
socket slides off of the fastener.
• The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
V ..................... Volts
A ..................... Amperes
hz ................... hertz
W .................... Watts
min ................. Minutes
............... Alternating current
............. direct current
n
0
................... No-load speed
............... Class II Construction
…/min ........... Revolutions per minute
............... Grounding terminal
BpM ............... Beats per minute
.............. WARNING – To reduce the risk of injury, user must read instruction manual .
Contents
Cordless Impact Wrench, Instruction Manual
WARNING!
Remove the Cordless Impact Wrench from the package, and examine it carefully. do not
discard the carton or any packaging material until all parts have been examined.
WARNING!
If any part of the Cordless Impact Wrench is missing or damaged, do not attach the battery
pack to the tool or use the tool until the part has been repaired or replaced. Failure to heed
this warning could result in serious injury.