General
WARNING:
When servicing,
use only identical replacement parts. The use
of any other part may create a hazard or cause
product damage.
DO NOT use solvents when cleaning plastic parts.
Plastics are susceptible to damage from various
types of commercial solvents and may be dam-
aged by their use. Use a clean cloth to remove dirt,
dust, oil, grease etc.
WARNING:
Do not allow
brake fluids, gasoline, petroleum-based
products, penetrating oils, etc. to come into
contact with plastic parts. They contain
chemicals that can damage, weaken or
destroy plastic.
DO NOT abuse power tools. Abusive practices can
damage the tool and the workpiece.
WARNING:
DO NOT attempt
to modify tools or create accessories. Any
such alteration or modification is misuse and
could result in a hazardous condition leading
to possible serious injury. It will also void the
warranty.
It has been found that electric tools are subjected
to accelerated wear and possible premature
failure when they are used on fiberglass boats
and sports cars, wallboard, spackling compounds
or plaster. The chips and grindings from these
materials are highly abrasive to electric tool parts
such as bearings, brushes, commutators, etc.
Consequently, it is not recommended that this
tool be used for extended work on any fiberglass
material, wallboard, spackling compounds or
plaster. During any use on these materials it
is extremely important that the tool is cleaned
frequently by blowing it out with an air jet.
!
18
19
RANDOM ORBIT SANDER 054-1240-4
RANDOM ORBIT SANDER 054-1240-4
MAINTENANCE
WARNING:
Always wear
safety goggles or safety glasses with side
shields during all sanding operations. It is
critical that you also wear safety goggles or
safety glasses with side shields and a dust
mask while blowing dust out of the sander
with an air jet. Failure to take these safety
precautions could result in permanent eye or
lung damage.
Lubrication
All of the bearings in this tool are lubricated with
a sufficient amount of high-grade lubricant for the
life of the unit under normal conditions. Therefore,
no further lubrication is required.
!
!
!
EXPLODED VIEW
