19
headline bars
continuation tabs
notes
warnings
Ins
Tall
TH
e H
ea
De
R
bR
aCK
eT
1 1/4” ( 3 cm)
Attach the Header Bracket
Place the bottom edge of the bracket on the line marked above the highest point of travel.
Ceiling Installation
The header bracket may be mounted to the ceiling
if there is minimal clearance above the door. If so,
extend the centreline to the ceiling. The back edge
of the bracket must not be further than 5" (12.7 cm)
from the header wall.
1 1/4" (3 cm) Above Sectional Door/
7" (18 cm) Above One-piece Jamb
Door
Highest Point of Travel
Mark the 2 holes with a pencil.
Drill two 3/16" (5 mm) pilot holes.
Attach the header bracket with
2 lag screws provided.
NOTE:
• Note the orientation of the header bracket. Do not mount it upside down.
5" (12.7 cm)
