Masterclock GPS 500, Руководство пользователя

Страница: 2 / 13

www.masterclock.com Tel: 636-724-3666 Fax: 636-724-3776
GPS500 User Manual – Rev E – 2020.04.14 2484 W Clay St, St Charles, MO 63301
2
DISCLAIMER
Information contained in this document is
subject to change without notice.
Masterclock, Inc. (hereinafter MC) makes
no warranty of any kind with regard to this
material, including, but not limited to, the
implied warranties of merchantability and
fitness for a particular purpose. MC shall
not be liable for errors contained herein or
for incidental or consequential damages in
connection with the furnishing,
performance, or use of this material. MC is
not responsible for legislative changes to
the Daylight Saving Time (DST) rules, nor
to the systems relying on accurate time,
which may be affected by such changes.
Issues related to legislative changes to the
DST rules are not covered under the
Masterclock, Inc. limited warranty. See
important
limited warranty information
on page 7.
ADVISORY NOTICE
CONCERNING THE
GPS SATELLITE SYSTEM
AND THE GPS 500
GPS REFERENCE DEVICE
Depending on many factors beyond the
control of MC, the signals that are
received from the GPS satellites are
subject to interference, fading, satellite
failure and other influences
that could
cause the GPS 500 to generate erroneous
time and/or date information and, under
some conditions,
could prevent it from
generating a Time Code signal and/or
cause it to generate an erroneous Time
Code signal. It is the responsibility of the
user to determine the adequacy and
suitability of this device for the intended
use.
TABLE OF CONTENTS
Installation .................................................... 3
Operation ...................................................... 5
Antenna Location ......................................... 7
Diagram ...................................................... 12
Interval Blanking ......................................... 13
Limited Warrant and Exclusions ........... ..... 13
Hardware Service ...................................... 14
Contact ...................................................... 14
GPS 500 FEATURES

Generates SMPTE / EBU or
IRIG-B Time Codes

Synchronized to atomic clock in GPS
satellites

-11.5 to +12 hour time zone offsets in
30-minute increments

Automatic daylight saving (US & Canada
time standard)

Multiple outputs

NMEA/Kinemetrics / Truetime serial
protocol output

Wide power supply input range:
12 to 48 VDC

Switch compatible time zone, DST

Switch compatible interval blanking
in the Schneider Ion Meter®

Switch compatible format and baud rate
To ensure a successful installation to your local
grounding and electrical specifications, your
GPS
500 was thoroughly tested with its antenna prior
to shipment.