Masterclock CS5 Lan Network Injector User Manual – v2014.01.16
10
Telnet
Those with Linux and other non-Windows operating
systems will not be able to use WinDiscovery.
For Windows and non-Windows users alike, a terminal-
style configuration interface is available via Telnet to
specify the IP address of the clock as the server with
which to connect.
The factory default port
is Telnet server
port 23
.
By default, Microsoft Windows 7 has the Telnet Client
disabled.
TO INITIATE A TELNET SESSION IN WINDOWS
Select the Run command-line interface from the Start menu
and enter the command “
Telnet
” followed by a space, and
then the IP address of the unit and click [OK].
TO ENABLE TELNET IN WINDOWS
Open the Windows Control Panel, click on [
Programs
], click
on [
Turn Windows features on or off
], check [
√
] Telnet Client
and click [
OK
].
TO ENABLE TELNET IN LINUX
See your system administrator.
Configuration via Telnet may not be
convenient for devices operating with a
factory default configuration since the IP
address is not known. Use the
WinDiscovery application to establish
first-time networking configuration.
For security purposes, the Telnet interface
can be disabled. When disabled, you will
no longer be able to access the device
with Telnet. To re-enable the Telnet
feature, one of the other configuration
methods must be used, or the clock must
be reset to factory default.
If you are not familiar with Telnet, ask
your network administrator for
assistance.
.
