16
Assembly
19
K
X2
K
K
27
24
Operating Instructions
PRE-SEASONING YOUR GRILL
Pre-seasoning will rid your grill of chemicals and oils left over by the manufacturing process allowing them
to burn off. PRE-SEASON GRILL PRIOR TO FIRST USE.
1. Using a napkin or cloth, rub a light coat of cooking oil on cooking grate, charcoal tray, inside grill lid and
fi rebox.
2. Raise the cooking grate, open the charcoal door and open air dampers.
3. Stack/place up to 1.8kg of charcoal on charcoal tray. Stack charcoal in a pyramid, close charcoal door
and light charcoal (see LIGHTING YOUR GRILL below). LEAVE GRILL LID OPEN. In about 15 minutes when
the fl ames die out, spread charcoal into a single layer. Use only charcoal as fuel. Do not use any other fuel
source.
4. With protective gloves on, lower cooking grate into position. CLOSE THE LID.
5. Let the grill burn for about 1 hour. Make sure the temperature reaches 177°C.
6. Allow grill to cool COMPLETELY.
7. Reapply a light coat of cooking oil on cooking grate, charcoal tray, inside grill lid and fi rebox.
8. Relight the grill and burn for 20 minutes.
Frequent seasoning prevents rusting. If rusting occurs, clean with a steel brush, apply vegetable shortening,
and heat as indicated above.
5
Hardware List
Qty
Description
Qty
Description
A
8
M6x52 Hex Phillips/Slotted-Head Screw
I
1
M6x21 Shoulder Screw
B
2
M8 Axle Nut
J
2
#10 Lock Washer
C
2
#8 Flat Washer
K
39
M6x15 Phillips/Slotted-Head Screw
D
2
Door Hinge Pin
L
3
Cotter Pin
E
2
M10 Nut
M
2
Axle Bushing
F
12 M5x10 Flat-Head Screw
N
1
M5 Self-Locking Nut
G
4
M5x8 Shoulder Screw
O
1
M5x15 Screw
H
3
M6 KEPS Nut
P
2
M6x15 Flathead Screw
DO NOT RETURN TO RETAILER
for assembly assistance, missing or damaged parts. Please
contact MASTERBUILT Customer Service at +44 20 8036 3201 or [email protected] in
the U.K and +0031 4 7799920, +49 2151 4474509, or [email protected] in Europe.
Please have the model number and serial number available. These numbers are located on the
silver rating label on the grill.
STOP
•
BEFORE ASSEMBLY READ ALL INSTRUCTIONS CAREFULLY.
• Assemble on a clean fl at surface.
• Tools needed: 20.32 cm long Phillips head screwdriver, pliers or adjustable wrench
• Approximate assembly time: 45 minutes
• Actual product may differ from picture shown.
• It is possible that some assembly steps have been completed in the factory.