9
Figure 5
Time of Day Setting
1) Press the SET button. The screen will show the Time of Day in blinking
numbers.
2) To change the Time of Day, use the UP or DOWN arrows.
3) Press the SET button.
Day of Week Setting
1) Press the SET button. The screen will show the Day of Week in blinking
triangle.
2) To change the Day of Week, use the UP or DOWN arrows.
3) Press the SET button.
Time of Regeneration Setting (the factory default is 2 AM)
1) Press the SET button. The screen will show the Time of Regeneration in
blinking numbers.
2) To change the Time of Regeneration, use the UP or DOWN arrows.
3) Press the SET button.
Regeneration Day Override Setting (the factory default is 0)
1) Press the SET button. The screen will show the Regeneration Day
Override in blinking numbers.
2) To change the number, use the UP or DOWN arrows.
3) Press the SET button.
Salt Amount Setting
1) Press the SET button. The screen will show the Salt Amount as pounds
in blinking numbers.
2)
DO NOT CHANGE THE NUMBER
.
3) Press the SET button.
Softening Capacity Setting
1) Press the SET button. The screen will show the Capacity as grains in
blinking numbers.
2)
DO NOT CHANGE THE NUMBER
.
3) Press the SET button.
Hardness Setting (the factory default is 10
)
1) Press the SET button. The screen will show the Hardness as grains per
gallon in blinking numbers.
2) To change the number, use the UP or DOWN arrows.
3)
Press the SET button.
Note: The screen will now flash between flow rate and gallons
remaining until next regeneration.
If water was tested by Master Water Conditioning, follow recommendations
on water analysis, for hardness setting.
