manualshive.com logo in svg

Master MH-150T-DFV-A, Руководство пользователя, Страница: 3 / 12

Поделиться
Скачать
Master MH-150T-DFV-A Скачать руководство пользователя страница 3

NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR WHILE CONNECTED 

TO A POWER SOURCE

© 2016, Pinnacle Climate Technologies, Inc. 

SilentDrive® Forced Air Heater User’s Manual 

2

Safety Information

ALWAYS use only the electrical power (voltage and 

frequency) specified on the model plate of the heater.

ALWAYS use only three-prong, grounded outlet and 

extension cord. 
ALWAYS use only 14 AWG or better extension cord.
ALWAYS unplug the heater when not in use.  
ALWAYS install the heater so that it is not directly 

exposed to water spray, rain, dripping water, or wind.

NEVER use fuels such as gasoline, benzine, paint 

thinners or other oil compounds in this heater.
NEVER refill the heater’s fuel tank while the 

heater is operating or still hot. This heater is 

EXTREMELY HOT while in operation. 
NEVER block air inlet (rear) or air outlet (front).

NEVER use duct work in front or rear of heater.
NEVER move or handle heater while still hot.
NEVER transport heater with fuel in tank.
NEVER use with an external fuel tank.

Keep all combustible materials away from this heater.

 

Minimum Clearance From Combustibles

150T-SDR/DFV

220T-SDR/DFV

Top

4 ft.

4 ft.

Sides

4 ft.

4 ft.

Front

8 ft.

8 ft.

ALWAYS locate heater on a stable and level surface. 
If your heater is equipped with a thermostat, 

once it is plugged in, it can start at anytime in 

accordance with the thermostat setting. 

RISK OF BURNS, 

FIRE AND 

EXPLOSION!

RISK OF 

ELECTRIC 

SHOCK!

CAUTION! 

HOT WHILE IN 

OPERATION. 

DO NOT TOUCH. KEEP CHILDREN, 

ANIMALS, CLOTHING AND 

COMBUSTIBLES AWAY FROM HEATER. 

WARNING

WARNING

WARNING

Specifications

Model #

150T-SDR/DFV

220T-SDR/DFV

Rating: Btu/Hr

150,000

220,000

Fuel Consumption: Gal/Hr

1.14

1.67

Fuel Tank Capacity: Gallons

10

13

Pump Pressure: PSI

111

93

Volts: AC/Hz

120VAC ~ 60 Hz

120VAC ~ 60 Hz

Amps

≤3.15A

≤3.15A

Phase

1Ø

1Ø

Specifications subject to change without notice.

Locating Your Serial Number:

Your serial number can be found on a white label on the right side cover of your heater. For Example: 

150812779. Year = 15, Month = 08, Unit # = 12779. Have your Serial Number ready before calling 

customer service at 800-641-6996.

Содержание MH-150T-DFV-A













Отзывы:

Нет отзывов