Henan Master Machinery Co., Ltd
Tel:(+86)17737606271
www.mastermachinerys.com
14
◎
If you has to park on the slopes, please put obstacles before
the front wheel to prevent the machine slide down along the
slopes.
◎
Leave the machine, please keep “forward and backward
handle” in the middle position, turn off the engine. Lock the
“manual lock lever”, and take away the key.
1) The machine will stop moving when the forward and back handle
on the middle position.
5.3 Operation of vibration and compaction
1
）
Machine begin to vibrate when the vibration switch is on the ON
position.
2
）
Machine stop to vibrate when the vibration switch is on the OFF
position
Attention: Stop the vibration when the machine stops moving.
Stop the vibration at once when the machine runs into the mud.
5.4 Operation of the sprinkler system
1
）
Check the water level before open the sprinkler system, try to fill
the water tank full.
2
）
The sprinkler system will be opened by turning the sprinkler valve
switch.
Attention: In the cold weather, make sure the tank is empty to
prevent the water from freezing after the work finished.
Presentation
：
Drain plug is under the water tank.
5.5 Adjustment of the fender
Loosen the screw bolt, and then move the fender up and down to make
sure the fender is installed on the drum tightly.
