
EN
loosen the right bolt by using 6mm Hexagonal Wrench, until the belt is centered. When
adjusting the belt using the Hexagonal Wrenches, it is important to adjust the belt in half turn
increments. Over adjusting the belt can cause damage to the mat.
5. TROUBLE SHOOTING
This treadmill is designed in a way that in the event of an electrical fault, the machine will turn
off automatically to prevent any injuries to the user and to prevent damage to the machine (i.e.
motor).
When the treadmill behaves erratically, simply reset the treadmill by turning the power switch
off, waiting for 1 minute then turning the power button back on.
If, after you have reset the treadmill, it is still not running correctly, please run the self-checking
analyse (please refer to
Self-Checking
) to distinguish what type of error problem the machine is
encountering.
5.1 Alarm signals
Error code list
Error code
Reason
Defective parts
Solution
E0
No receive safety key single
Safety key
Insert Safety Key
E2
Running belt opposition is too big or overload
Lubrication system Pls add silicion oil
E4
No magnetic for motor or motor fired
Motor
Motor cable don't connect very well or change motor
E5
Signal cable connection fail
Signal cable
Change single cable
E6
Components of controller are losing efficacy
Controller
Change controller
E7
Output voltage is over safety system working
voltage
Power
Make sure voltage is between AC180V-AC250V
ERR
I
ncline VR error
I
ncline system
Check incline motor connection and machine self-checking
Before attempting any work on the treadmill, ensure that the power
is off and the plug is removed from the power point.
Do not use extension leads as it may lead to power decrease and
failure.
Содержание F22
