EN
INSTALLATION OF THE REMOTE CONTROL
You should hold the remote control in your hand when using your Walking machine in order to ensure that you can stop your
device at any time in an emergency situation.
As shown in the following pictures, insert two Micro AAA batteries (1,5V) into the remote control.
+ Accelerate the treadmill - Decelerate the treadmill
On/off switch
USING THE REMOTE CONTROL
The remote uses a 4.0G radio control. Connect the remote control to your device so that it does not interfere with other walking
machine.
How to connect your remote:
1: Connect the waling machine and turn it on. The LEDS brighten after a long "ring".
Press the remote control [SPEED +] and [SPEED-] buttons simultaneously, release the buttons until the red lamp and the green
lamp light up alternately. Now you will hear two sounds, and the LEDS go off. The remote control and the Walking machine are
connected.
