Manual Recording Function
Press the power button on the mirror to activate the recorder and start automatic recording. Press and
hold the power button again for 3 seconds, the mirror will automatically save the video and power off.
Picture Function
If the mirror is powered on press the mode button to enter the photo mode. In the upper left corner of
the screen the video recording icon will change to the image icon. Press the ok button to take a picture.
To switch back to video mode press the mode button twice.
Collision Sense Function
A built in G-sensor will detect motions that indicate a collision has occured and will automatically lock
the recorded video from the incident. A lock icon will appear on the upper left screen. This video will not
be overwritten. The filename of locked footage begins with SOS (whereas regular files would begin with
REC). In the menu options the senstivity of the g-sensor can be adjusted.
One Button Lock Function
To protect the video from being overwritten press the mode button while in video recording mode and
that footage will be locked.
Date and Time Setup
In the standby state, press the menu button to enter the system setup menu. Press the up/down buttons
to move to the date setup option, then press the ok button. Adjust the date and time using the up/down
buttons. Press the ok button to switch between date and time.
One Button Mute Function
While the camera is recording press the down button, the microphone icon on the lower left screen
while to turn on sound recording. Press the down button again to turn off. This option will be saved
automatically (either muted or un-muted).
U-Disc Mode
The mirror can be connected to a computer with a USB cable. When connected the screen will display
three options: mass storage, PC camera, and REC mode. With the up/down buttons select the mass
storage option and press ok to enter the u-disc mode.
