Function 4: Parking Monitor
In standby mode long press the down button to turn on or off the parking monitor function.
Ok Button/Video/Image/File Play
Function 1: Turn On or Off Video Recording
In video recording mode short press the ok button to start video recording. Press again to stop record-
ing.
Function 2: Take Picture
In photo mode short press the ok button to take a picture.
Function 3: File Play
In the file browse mode short press the ok button to play video.
Function 4: Confirm
In video recording, photo, or replay modes press the menu button to enter the main menu mode, press
the up/down buttons to browse menu items, and use the ok button to confirm.
Menu Button
In standby mode press the menu button to enter the main menu. Press the
button again to exit the menu.
Reset Button
When the device is not responding it can be reset by pressing the reset button on the back device.
INSTALLATION INSTRUCTIONS
1. Shut off the vehicle’s engine.
2. Insert the Micro SD card into the card slot on top of the mirror.
Note: The Micro SD card needs to be a high-speed class 6 or above with a capacity between
512MB and 32GB.
3. Using the included straps attach the mirror over the exisiting rear view mirror of the car.
4. Plug the power cable into the vehicle’s cigarette lighter.
5. Connect the mini USB cable end of the power cable into the mirror.
Note: The wire can often be tucked between the ceiling panel and windshield in most cars
6. Install the backup camera at the rear of the vehicle. Installation will vary from vehicle to vehicle,
guides for most vehicles will be on the internet or you can consult a trained professional.
7. Start the vehicle’s engine to check if the backup camera turns on when the car is in reverse and the
DVR starts recording both front and back footage. When installed correctly the charge indicator will be
on, the video indicator will flick, and the recorder will start.
