1. Operating too frequent.
2. Remote control is too close to the rearview
mirror.
1. Plastic insulation sheet of the battery is
not removed.
2. Operation went wrong.
Stuck at some interface
and can't operate
anymore.
System does not react
when operating the
remote control.
Problems
Diagnoses
Solutions
1. reboot mirror.
1. Remove the insulation sheet. Reinstall the battery.
2. keep the distance between the remote control and the mirror at 0.5m-1.0m.
2. reboot mirror and if it is too often, back to factory for repair .
Auto-dimming (optional)
the light sensor from the back of
mirror detects the ambient light
front light sensor detects the light
from rearward-approaching vehicles.
The auto dimming of our mirror works automatically when you start the engine, and the indicator will light up . The light
sensor in the back of the rearview mirror will always detect the ambient light. The auto-dimming doesn't work in the
broad day for the adequate daylight. However, when night falls and the ambient light is weak, the auto-dimming starts
to work and automatically dims to eliminate the glare of rearward-approaching vehicles. Furthermore, the degree of
brightness of the auto-dimming glass depends on the level of the light. The stronger the light from the back of the car
is, the darker the glass is. Hence it protects drivers from becoming dizzy and avoiding car accident.
Not recording / Showing
the no SD card condition
1. The SD card class too low to read
and store.
1. Change into the high recording speed memory card.
2. Remove the SD card, then put it in again.
3. Format the SD card, and reboot.
2. SD card install wrong.
3. SD card incompatible
TROUBLE SHOOTING
27
28
