Master MFG 300 Gallon Space Saver, Руководство пользователя

Страница: 2 / 6

Note: Do not return product to the distributor/dealer for warranty works. Call Master Manufacturing at 320-
340-6464 for any warranty work or replacement parts.
WARNING
While this sprayer does come equipped with fork lift holes, the sprayer should be loaded
into the truck or trailer prior to being filled with liquid to prevent any potential tipping issue
due to weight or balance.
Introduction
The purpose of this manual is to assist you in the assembly, operation and maintenance of your sprayers or accessories.
Please read through this manual completely too fully understand how to operate and maintain your equipment. This
product has been manufactured to provide years of dependable service; proper operation and maintenance will ensure
its dependability. Keep your manual in a safe, convenient place for future reference. Always mention the model and part
number in any correspondence. Refer to the proper engine and pump manuals for your model for proper maintenance
and operation.
Assembly/Operation
This sprayer comes fully assembled from the manufacturer and only needs to be unpacked and prepared for use. Before
operation refer to the engine and pump manuals to familiarize yourself with the engine controls, lubrication and
maintenance. These manuals have been included with the sprayer.
Startup Inspection:
Refer to the engine manual and ensure the correct kind and quantity of oil is added to the engine.
Add fuel to the engine. Verify the pump is properly lubricated. Inspect the inside of the tank for any debris or parts.
Ensure the inlet filter to the pump is clean of any debris and the screen is not plugged.
IMPORTANT:
Before spraying chemicals, fill the tank half full of plain water to allow
familiarization with the sprayer and to prevent waste of expensive chemicals.
Startup:
Fill the tank with clean water. Locate the pressure regulator and turn the knob counter clockwise to decrease
the pressure. Start the engine per the manual instructions and allow it to warm up. Point the spray gun away from any
person and in a safe direction to be sprayed. Press the spray gun trigger until water begins to spray from the wand.
Adjust the pressure regulator to the desired pressure by viewing the pressure gauge.
Chemical:
Add the proper amounts of chemical and water to the tank and the sprayer should be ready to spray.
Sprayer Maintenance
A sprayer is a carefully designed and built machine that should provide many years of reliable service if properly cared
for, the main rule in caring for any sprayer is: KEEP IT CLEAN. Neglect costs dollars in repairs, waster spray material and
premature replacement of the sprayer.