master mechanic 189466, Руководство пользователя

Страница: 5 / 22

5
GENERAL SAFETY WARNINGS
WARNING:
Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
General Electric Gardening Tool Safety
Warnings
– Work Area Safety
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools
create sparks which may ignite the liquids,
fumes or dust.
Keep children and bystanders away while
operating a power tool.
Distractions can cause
you to lose control.
General Electric Gardening Tool Safety
Warnings
– Electrical Safety
Battery charger plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) chargers.
Unmodified plugs and
matching outlets will reduce risk of electric
shock.
Avoid body contact with earthed or
grounded surfaces such as water pipes.
There is an increased risk of electrical shock if
your body is earthed or grounded.
Do not expose power tools, battery chargers
or batteries to rain or wet conditions.
Water
entering the tool, chargers or batteries will
increase the risk of electric shock.
Do not abuse the cord. Never use the power
cord for carrying, pulling or unplugging the
charger. Keep the power cord away from
heat, oil, sharp edges, and moving parts.
Damaged or entangled cords increase the risk
of electric shock.
When operating the charger outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
Never operate a power tool in the rain.
If operating a charger in a damp location is
unavoidable, use a residual current device
(RCD) protected supply. An RCD is also
known as a ground fault circuit interrupter
(GFCI) or earth leakage circuit breaker
(ELCB).
Use of an RCD reduces the risk of
electric shock.
ELECTRIC GARDENING TOOL SAFETY
!
SAVE THESE INSTRUCTIONS FOR REFERENCE
GENERAL SAFETY WARNINGS
WARNING:
Ventilation openings in batteries and chargers must always be
open to allow cooling air to circulate freely. Air vents that are blocked,
restricted or covered may result in the battery or charger overheating.
Overheating may lead to damage to the tool or cause a fire, resulting in
possible serious injury.
!