master mechanic 137459, Руководство пользователя

Страница: 11 / 16

11
INSTALLING A BATTERY IN THE
FLASHLIGHT
1. Remove the discharged battery (1)
from the tool by pressing on the
battery release button (2) and sliding
the battery backward until it is
removed from the flashlight handle (3)
(Fig. 1).
2.
Slide the fully charged battery into the
matching slots (4) in the flashlight
handle where the discharged battery
has been removed.
NOTE: Make sure the slots in the battery
are fully engaged with the mounting keys
in the drill handle. The battery release
button will “click” into place when the
battery is fully installed.
WARNING:
Do not immerse the
battery pack in water. Sudden cooling
could cause the hot battery to explode or
leak.
FLASHLIGHT SWITCH
To turn the flashlight on, press the
ON/OFF switch button (1) once. To turn
the flashlight switch OFF, press the switch
button again (Fig. 2).
REPLACING THE BULB
WARNING:
The lens and bulb
become very hot when the flashlight is
turned ON.
Wait for lens to cool before
removing lens cover or bulb. Remove the
battery before replacing the bulb.
If the light bulb burns out, a new
replacement bulb is stored inside the lens
assembly.
ASSEMBLY AND OPERATING
!
!
Fig. 2
Fig. 1