16
INSTALLING THE AUXILIARY HANDLE
Install the auxiliary handle (1) for two
handed operation of the drill (Fig. 7). This
is particularly important for drilling in
concrete.
1. Rotate the auxiliary handle counter
clockwise to open mounting collar (2).
2. Slide the auxiliary handle collar over
the chuck and fully onto the drill
housing (3).
3. Rotate the auxiliary handle to a
comfortable position.
4.
Rotate the auxiliary handle clockwise
to tighten the mounting collar onto the
drill housing.
NOTE:
Do not over tighten the auxiliary
handle. You will break the mounting collar.
INSTALLING THE DEPTH ROD
The depth rod is used as a gauge to
control the depth of the drilled hole.
1. Rotate the auxiliary handle (1) counter
clockwise to open the mounting collar
(Fig. 8).
2. Insert the hexagonal depth rod (2) into
the matching hole in the auxiliary
handle mounting collar (3).
3.
Position the depth rod so the tip (4)
will contact the workpiece when the
drill reaches the appropriate depth.
NOTE:
The auxiliary handle must be
placed in the horizontal position to allow
depth rod to be inserted into the mounting
collar. Tighten the auxiliary handle by
rotating it clockwise.
ASSEMBLY AND OPERATING
Fig. 7
Fig. 8
Содержание 134468
Страница 23: ...23 EXPLODED VIEW ...
