master mechanic 134465, Руководство пользователя

Страница: 15 / 22

15
SANDPAPER SELECTION
Selecting the correct grit and type of
sandpaper is extremely important in
achieving a high quality sanded finish.
Aluminum oxide, silicon carbide and other
synthetic abrasives are best for power
sanding.
Natural abrasives such as flint
and garnet are too soft for economical
use in power sanding.
For safety reasons, the operator
must read the sections of this
Owner’s Manual entitled "GENERAL
SAFETY WARNINGS", "POWER
TOOL SAFETY", "SPECIFIC SAFETY
RULES", "EXTENSION CORD
SAFETY" and "SYMBOLS" before
using this sander.
Verify the following every time the
sander is used:
1. Sandpaper is in good condition
and properly installed on the
sander.
2. The workpiece is properly
secured and free from any
foreign objects.
3. Safety glasses, safety goggles,
or face shield is being worn.
4. Hearing protection and dust
mask are being worn.
Failure to observe these safety rules
will significantly increase the risk of
injury.
WARNING
!
ASSEMBLY AND OPERATING