Master Lock Company LLC, Milwaukee, WI 53154 U.S.A. | 800-574-7260
©2017 Master Lock Company LLC | All Rights Reserved.
6
P57672 REV A
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Warning: Any modification without the express written consent of The Master Lock Company LLC could void
your authority to operate this product and invalidate the product warranty.
Model 27213 Bluetooth Keypad
The 27213 Bluetooth Keypad is an access control keypad reader that is part of the Master Lock Bluetooth family of products. The
Keypad works with the 27219 and 27220 Door
Controllers to provide entry at shelters, cabinets and others equipped with Master Lock’s
high-security electromechanical locks. Devices are managed within the Master Lock Vault Enterprise Access Control System (ACS)
and use credentials issued by (ACS,) including Temporary Access Codes (TACs) for manually entered or mobile credentials from the
Master Lock Vault Enterprise Bluetooth mobile app.
These elements of the system function together to provide convenient and simple access control and management without requiring a
real-time network connection with the ACS Host.
General Capabilities
Access is granted through use of the Master Lock Vault Enterprise App (App) installed on a Bluetooth 4.0 capable-device or a manually
entered Temporary Access Code (TAC) at the Keypad. When the Keypad communicates a valid credential to the Door Controller, the
controller sends power to unlock the locks. The Door Controller stores transaction data, which is also uploaded to ACS by the App
through
the Keypad’s Bluetooth connection.
The Keypad is also used to deliver firmware and configuration updates to the Door Controller. The Keypad provides information about
errors and battery status via its LED indicator. The Keypad LED status is mirrored on an indicator on the Door Controller board.
The Keypad offers a battery jump port that provides a connection for a 9V battery to supply power to the Door Controller if all other
power sources have become unavailable.
Preparation and Installation
Keypad Installation (Direct Mounting)
1.
Measure
1.
Identify the desired vertical height for your installation.
(Note: Ensure compliance with regulations and guidelines
for accessibility)
2.
Refer to the keypad mounting dimensions on pg 3 to mark
the mounting holes and keypad cable through-hole on the
mounting surface. Center punch all marks.
3.
Using the center mark, create
a 5/8” opening for the
keypad cable through-hole using a drill and step bit.
4.
D
rill (4) 7/32” (.218”) holes in the punched locations
completely through the door to the other side.
NOTE 1:
Grommets of 5/8” diameter are provided to
protect the cable from sharp edges. Insert a grommet in
both sides of the cable through-hole if desired.
NOTE 2:
Access to both the front and back of the
mounting surface is necessary for this mounting method.
2.
Install (4) #10-32 studs of appropriate length into the mounting
holes on the back of the Keypad (not provided)
Keypad Gasket
Bluetooth Keypad
Studs
Keypad Gasket
